# Automating Filebeat

**URL:** <https://discuss.elastic.co/t/automating-filebeat/283816>\
**Category:** Beats\
**Tags:** filebeat\
**Created:** [September 9, 2021, 8:56pm UTC](https://discuss.elastic.co/t/automating-filebeat/283816 "2021-09-09T20:56:26Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![peter\_murphy](https://avatars.discourse-cdn.com/v4/letter/p/278dde/32.png) [@peter\_murphy](https://discuss.elastic.co/u/peter_murphy)\
**Post date:** [September 9, 2021, 8:56pm UTC](https://discuss.elastic.co/t/automating-filebeat/283816/1 "2021-09-09T20:56:26Z")

</div>

Hello,

I am using Filebeat to send my local device's Osquery log to my self-hosted Elasticsearch via Logstash. The pipeline is working correctly, but only if I trigger Filebeat manually. I'm sure the answer is simple, but I'm having trouble figuring out how to automate the process; I thought this might be the scan\_frequency parameter in the yml but no dice.

How do I configure Filebeat to automatically detect changes in the log and push them to Elasticsearch?

---

<div class="post-metadata">

**Author:** ![warkolm](https://sea2.discourse-cdn.com/elastic/user_avatar/discuss.elastic.co/warkolm/32/39224_2.png) [@warkolm](https://discuss.elastic.co/u/warkolm)\
**Post date:** [September 9, 2021, 11:31pm UTC](https://discuss.elastic.co/t/automating-filebeat/283816/2 "2021-09-09T23:31:56Z")

</div>

Filebeat will automatically scan files it has been told to watch.

Sharing your config might be helpful at this stage.

---

<div class="post-metadata">

**Author:** ![peter\_murphy](https://avatars.discourse-cdn.com/v4/letter/p/278dde/32.png) [@peter\_murphy](https://discuss.elastic.co/u/peter_murphy)\
**Post date:** [September 10, 2021, 4:49pm UTC](https://discuss.elastic.co/t/automating-filebeat/283816/3 "2021-09-10T16:49:53Z")

</div>

But will it run automatically? Or does it need to be configured manually as a LaunchDaemon or something? This is the only documentation I can find on starting the service.

> **[Start Filebeat | Filebeat Reference \[7.x\] | Elastic](https://www.elastic.co/guide/en/beats/filebeat/7.x/filebeat-starting.html)**

```auto
###################### Filebeat Configuration Example #########################

# This file is an example configuration file highlighting only the most common
# options. The filebeat.reference.yml file from the same directory contains all the
# supported options with more comments. You can use it as a reference.
#
# You can find the full configuration reference here:
# https://www.elastic.co/guide/en/beats/filebeat/index.html

# For more available modules and options, please see the filebeat.reference.yml sample
# configuration file.

# ============================== Filebeat inputs ===============================

filebeat.inputs:

# Each - is an input. Most options can be set at the input level, so
# you can use different inputs for various configurations.
# Below are the input specific configurations.

- type: log

  # Change to true to enable this input configuration.
  enabled: true

  # Paths that should be crawled and fetched. Glob based paths.
  paths:
    - /var/log/osquery/*.log
    #- c:\programdata\elasticsearch\logs\*

  # Exclude lines. A list of regular expressions to match. It drops the lines that are
  # matching any regular expression from the list.
  #exclude_lines: ['^DBG']

  # Include lines. A list of regular expressions to match. It exports the lines that are
  # matching any regular expression from the list.
  #include_lines: ['^ERR', '^WARN']

  # Exclude files. A list of regular expressions to match. Filebeat drops the files that
  # are matching any regular expression from the list. By default, no files are dropped.
  #exclude_files: ['.gz$']

  # Optional additional fields. These fields can be freely picked
  # to add additional information to the crawled log files for filtering
  #fields:
  # level: debug
  # review: 1

  # Scan frequency in seconds.
  # How often these files should be checked for changes. In case it is set
  # to 0s, it is done as often as possible. Default: 10s
    scan_frequency: 10s

  ### Multiline options

  # Multiline can be used for log messages spanning multiple lines. This is common
  # for Java Stack Traces or C-Line Continuation

  # The regexp Pattern that has to be matched. The example pattern matches all lines starting with [
  #multiline.pattern: ^\[

  # Defines if the pattern set under pattern should be negated or not. Default is false.
  #multiline.negate: false

  # Match can be set to "after" or "before". It is used to define if lines should be append to a pattern
  # that was (not) matched before or after or as long as a pattern is not matched based on negate.
  # Note: After is the equivalent to previous and before is the equivalent to to next in Logstash
  #multiline.match: after

# filestream is an input for collecting log messages from files. It is going to replace log input in the future.
- type: filestream

  # Change to true to enable this input configuration.
  enabled: false

  # Paths that should be crawled and fetched. Glob based paths.
  paths:
    - /var/log/*.log
    #- c:\programdata\elasticsearch\logs\*

  # Exclude lines. A list of regular expressions to match. It drops the lines that are
  # matching any regular expression from the list.
  #exclude_lines: ['^DBG']

  # Include lines. A list of regular expressions to match. It exports the lines that are
  # matching any regular expression from the list.
  #include_lines: ['^ERR', '^WARN']

  # Exclude files. A list of regular expressions to match. Filebeat drops the files that
  # are matching any regular expression from the list. By default, no files are dropped.
  #prospector.scanner.exclude_files: ['.gz$']

  # Optional additional fields. These fields can be freely picked
  # to add additional information to the crawled log files for filtering
  #fields:
  # level: debug
  # review: 1

# ============================== Filebeat modules ==============================

filebeat.config.modules:
  # Glob pattern for configuration loading
  path: ${path.config}/modules.d/*.yml

  # Set to true to enable config reloading
  reload.enabled: false

  # Period on which files under path should be checked for changes
  #reload.period: 10s

# ======================= Elasticsearch template setting =======================

setup.template.settings:
  index.number_of_shards: 1
  #index.codec: best_compression
  #_source.enabled: false

# ================================== General ===================================

# The name of the shipper that publishes the network data. It can be used to group
# all the transactions sent by a single shipper in the web interface.
#name:

# The tags of the shipper are included in their own field with each
# transaction published.
#tags: ["service-X", "web-tier"]

# Optional fields that you can specify to add additional information to the
# output.
#fields:
# env: staging

# ================================= Dashboards =================================
# These settings control loading the sample dashboards to the Kibana index. Loading
# the dashboards is disabled by default and can be enabled either by setting the
# options here or by using the `setup` command.
#setup.dashboards.enabled: false

# The URL from where to download the dashboards archive. By default this URL
# has a value which is computed based on the Beat name and version. For released
# versions, this URL points to the dashboard archive on the artifacts.elastic.co
# website.
#setup.dashboards.url:

# =================================== Kibana ===================================

# Starting with Beats version 6.0.0, the dashboards are loaded via the Kibana API.
# This requires a Kibana endpoint configuration.
setup.kibana:

  # Kibana Host
  # Scheme and port can be left out and will be set to the default (http and 5601)
  # In case you specify and additional path, the scheme is required: http://localhost:5601/path
  # IPv6 addresses should always be defined as: https://[2001:db8::1]:5601
  host: "192.168.0.103:5601"

  # Kibana Space ID
  # ID of the Kibana Space into which the dashboards should be loaded. By default,
  # the Default Space will be used.
  #space.id:

# =============================== Elastic Cloud ================================

# These settings simplify using Filebeat with the Elastic Cloud (https://cloud.elastic.co/).

# The cloud.id setting overwrites the `output.elasticsearch.hosts` and
# `setup.kibana.host` options.
# You can find the `cloud.id` in the Elastic Cloud web UI.
#cloud.id:

# The cloud.auth setting overwrites the `output.elasticsearch.username` and
# `output.elasticsearch.password` settings. The format is `<user>:<pass>`.
#cloud.auth:

# ================================== Outputs ===================================

# Configure what output to use when sending the data collected by the beat.

# ---------------------------- Elasticsearch Output ----------------------------
#output.elasticsearch:
  # Array of hosts to connect to.
 # hosts: ["192.168.0.103:9200"]

  # Protocol - either `http` (default) or `https`.
  #protocol: "https"

  # Authentication credentials - either API key or username/password.
  #api_key: "id:api_key"
  #username: "elastic"
  #password: "changeme"

# ------------------------------ Logstash Output -------------------------------
output.logstash:
  # The Logstash hosts
  hosts: ["192.168.0.103:5044"]

  # Optional SSL. By default is off.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

# ================================= Processors =================================
processors:
  - add_host_metadata:
      when.not.contains.tags: forwarded
  - add_cloud_metadata: ~
  - add_docker_metadata: ~
  - add_kubernetes_metadata: ~

# ================================== Logging ===================================

# Sets log level. The default log level is info.
# Available log levels are: error, warning, info, debug
#logging.level: debug

# At debug level, you can selectively enable logging only for some components.
# To enable all selectors use ["*"]. Examples of other selectors are "beat",
# "publisher", "service".
#logging.selectors: ["*"]

# ============================= X-Pack Monitoring ==============================
# Filebeat can export internal metrics to a central Elasticsearch monitoring
# cluster. This requires xpack monitoring to be enabled in Elasticsearch. The
# reporting is disabled by default.

# Set to true to enable the monitoring reporter.
#monitoring.enabled: false

# Sets the UUID of the Elasticsearch cluster under which monitoring data for this
# Filebeat instance will appear in the Stack Monitoring UI. If output.elasticsearch
# is enabled, the UUID is derived from the Elasticsearch cluster referenced by output.elasticsearch.
#monitoring.cluster_uuid:

# Uncomment to send the metrics to Elasticsearch. Most settings from the
# Elasticsearch output are accepted here as well.
# Note that the settings should point to your Elasticsearch *monitoring* cluster.
# Any setting that is not set is automatically inherited from the Elasticsearch
# output configuration, so if you have the Elasticsearch output configured such
# that it is pointing to your Elasticsearch monitoring cluster, you can simply
# uncomment the following line.
#monitoring.elasticsearch:

# ============================== Instrumentation ===============================

# Instrumentation support for the filebeat.
#instrumentation:
    # Set to true to enable instrumentation of filebeat.
    #enabled: false

    # Environment in which filebeat is running on (eg: staging, production, etc.)
    #environment: ""

    # APM Server hosts to report instrumentation results to.
    #hosts:
    # - http://localhost:8200

    # API Key for the APM Server(s).
    # If api_key is set then secret_token will be ignored.
    #api_key:

    # Secret token for the APM Server(s).
    #secret_token:

# ================================= Migration ==================================

# This allows to enable 6.7 migration aliases
#migration.6_to_7.enabled: true

```

---

<div class="post-metadata">

**Author:** ![warkolm](https://sea2.discourse-cdn.com/elastic/user_avatar/discuss.elastic.co/warkolm/32/39224_2.png) [@warkolm](https://discuss.elastic.co/u/warkolm)\
**Post date:** [September 13, 2021, 12:42am UTC](https://discuss.elastic.co/t/automating-filebeat/283816/4 "2021-09-13T00:42:49Z")

</div>

What OS are you on, how did you install Filebeat?

---

<div class="post-metadata">

**Author:** ![peter\_murphy](https://avatars.discourse-cdn.com/v4/letter/p/278dde/32.png) [@peter\_murphy](https://discuss.elastic.co/u/peter_murphy)\
**Post date:** [September 14, 2021, 4:24pm UTC](https://discuss.elastic.co/t/automating-filebeat/283816/5 "2021-09-14T16:24:31Z")

</div>

MacOs.

I installed it locally from the website, but our goal is to ultimately deploy it to our fleet from an MDM.

---

<div class="post-metadata">

**Author:** ![warkolm](https://sea2.discourse-cdn.com/elastic/user_avatar/discuss.elastic.co/warkolm/32/39224_2.png) [@warkolm](https://discuss.elastic.co/u/warkolm)\
**Post date:** [September 14, 2021, 9:53pm UTC](https://discuss.elastic.co/t/automating-filebeat/283816/6 "2021-09-14T21:53:31Z")

</div>

Ah ok.  
I think a homebrew install will allow you to manage this automatically. Otherwise the tar.gz package needs its own custom script to manage the process, it's not something that is provided.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/elastic/original/3X/1/a/1ac57faf039f6b580b3f104ef42a2a89e41014de.png) [@system](https://discuss.elastic.co/u/system)\
**Post date:** [October 12, 2021, 11:54pm UTC](https://discuss.elastic.co/t/automating-filebeat/283816/7 "2021-10-12T23:54:01Z")

</div>

This topic was automatically closed 28 days after the last reply. New replies are no longer allowed.