# Disk-based shard allocation per node settings **URL:** \ **Category:** Elasticsearch\ **Created:** [May 16, 2014, 7:43am UTC](https://discuss.elastic.co/t/disk-based-shard-allocation-per-node-settings/17544 "2014-05-16T07:43:08Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Michel\_Conrad](https://avatars.discourse-cdn.com/v4/letter/m/5e9695/32.png) [@Michel\_Conrad](https://discuss.elastic.co/u/Michel_Conrad)\ **Post date:** [May 16, 2014, 7:43am UTC](https://discuss.elastic.co/t/disk-based-shard-allocation-per-node-settings/17544/1 "2014-05-16T07:43:08Z")
Is it possible to specify different thresholds for different nodes in the cluster? I could not find it in the documentation, when updating the setting through the cluster settings as described on [http://www.elasticsearch.org/guide/en/elasticsearch/reference/current/index-modules-allocation.html#disk](http://www.elasticsearch.org/guide/en/elasticsearch/reference/current/index-modules-allocation.html#disk) the threshold is applied to every node. When specifing the thresholds through the configuration file, will it then be only applied to the node reading the configuration? In this case how to I prevent the cluster settings being applied and overwriting the configuration file (remove a setting). Thanks for any thoughts, Michel -- You received this message because you are subscribed to the Google Groups "elasticsearch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [elasticsearch+unsubscribe@googlegroups.com](mailto:elasticsearch+unsubscribe@googlegroups.com). To view this discussion on the web visit [https://groups.google.com/d/msgid/elasticsearch/CAH0sEYgM4%3DmH2cA3wJoBQAmx82ddrz6N%3D8u3XE0EFoKoOwTUUQ%40mail.gmail.com](https://groups.google.com/d/msgid/elasticsearch/CAH0sEYgM4%3DmH2cA3wJoBQAmx82ddrz6N%3D8u3XE0EFoKoOwTUUQ%40mail.gmail.com). For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout). ---
**Author:** ![warkolm](https://sea2.discourse-cdn.com/elastic/user_avatar/discuss.elastic.co/warkolm/32/39224_2.png) [@warkolm](https://discuss.elastic.co/u/warkolm)\ **Post date:** [May 16, 2014, 8:36am UTC](https://discuss.elastic.co/t/disk-based-shard-allocation-per-node-settings/17544/2 "2014-05-16T08:36:09Z")
It's a cluster level setting, so all nodes use the same one. As far as I know, there is no node level setting. Regards, Mark Walkom Infrastructure Engineer Campaign Monitor email: [markw@campaignmonitor.com](mailto:markw@campaignmonitor.com) web: [www.campaignmonitor.com](http://www.campaignmonitor.com) On 16 May 2014 17:43, Michel Conrad [michel.conrad@trendiction.com](mailto:michel.conrad@trendiction.com) wrote: > Is it possible to specify different thresholds for different nodes in > the cluster? I could not find it in the documentation, when updating > the setting through the cluster settings as described on > > [Elasticsearch Platform — Find real-time answers at scale | Elastic](http://www.elasticsearch.org/guide/en/elasticsearch/reference/current/index-modules-allocation.html#disk) > the threshold is applied to every node. > > When specifing the thresholds through the configuration file, will it > then be only applied to the node reading the configuration? In this > case how to I prevent the cluster settings being applied and > overwriting the configuration file (remove a setting). > > Thanks for any thoughts, > Michel > > -- > You received this message because you are subscribed to the Google Groups > "elasticsearch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [elasticsearch+unsubscribe@googlegroups.com](mailto:elasticsearch+unsubscribe@googlegroups.com). > To view this discussion on the web visit > [https://groups.google.com/d/msgid/elasticsearch/CAH0sEYgM4%3DmH2cA3wJoBQAmx82ddrz6N%3D8u3XE0EFoKoOwTUUQ%40mail.gmail.com](https://groups.google.com/d/msgid/elasticsearch/CAH0sEYgM4%3DmH2cA3wJoBQAmx82ddrz6N%3D8u3XE0EFoKoOwTUUQ%40mail.gmail.com) > . > For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout). -- You received this message because you are subscribed to the Google Groups "elasticsearch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [elasticsearch+unsubscribe@googlegroups.com](mailto:elasticsearch+unsubscribe@googlegroups.com). To view this discussion on the web visit [https://groups.google.com/d/msgid/elasticsearch/CAEM624a6tk9jqGkh\_ED%3Dx\_bpJPxpiydP9\_KxTugrBVZuX5yaCw%40mail.gmail.com](https://groups.google.com/d/msgid/elasticsearch/CAEM624a6tk9jqGkh_ED%3Dx_bpJPxpiydP9_KxTugrBVZuX5yaCw%40mail.gmail.com). For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout). ---
**Author:** ![Michel\_Conrad](https://avatars.discourse-cdn.com/v4/letter/m/5e9695/32.png) [@Michel\_Conrad](https://discuss.elastic.co/u/Michel_Conrad)\ **Post date:** [May 16, 2014, 1:26pm UTC](https://discuss.elastic.co/t/disk-based-shard-allocation-per-node-settings/17544/3 "2014-05-16T13:26:14Z")
What if I set the option in the configuration file, will it then only be applied to the node reading the configuration file? On Fri, May 16, 2014 at 10:36 AM, Mark Walkom [markw@campaignmonitor.com](mailto:markw@campaignmonitor.com) wrote: > It's a cluster level setting, so all nodes use the same one. > As far as I know, there is no node level setting. > > Regards, > Mark Walkom > > Infrastructure Engineer > Campaign Monitor > email: [markw@campaignmonitor.com](mailto:markw@campaignmonitor.com) > web: [www.campaignmonitor.com](http://www.campaignmonitor.com) > > On 16 May 2014 17:43, Michel Conrad [michel.conrad@trendiction.com](mailto:michel.conrad@trendiction.com) wrote: > > > Is it possible to specify different thresholds for different nodes in > > the cluster? I could not find it in the documentation, when updating > > the setting through the cluster settings as described on > > > > [Elasticsearch Platform — Find real-time answers at scale | Elastic](http://www.elasticsearch.org/guide/en/elasticsearch/reference/current/index-modules-allocation.html#disk) > > the threshold is applied to every node. > > > > When specifing the thresholds through the configuration file, will it > > then be only applied to the node reading the configuration? In this > > case how to I prevent the cluster settings being applied and > > overwriting the configuration file (remove a setting). > > > > Thanks for any thoughts, > > Michel > > > > -- > > You received this message because you are subscribed to the Google Groups > > "elasticsearch" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [elasticsearch+unsubscribe@googlegroups.com](mailto:elasticsearch+unsubscribe@googlegroups.com). > > To view this discussion on the web visit > > [https://groups.google.com/d/msgid/elasticsearch/CAH0sEYgM4%3DmH2cA3wJoBQAmx82ddrz6N%3D8u3XE0EFoKoOwTUUQ%40mail.gmail.com](https://groups.google.com/d/msgid/elasticsearch/CAH0sEYgM4%3DmH2cA3wJoBQAmx82ddrz6N%3D8u3XE0EFoKoOwTUUQ%40mail.gmail.com). > > For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout). > > -- > You received this message because you are subscribed to the Google Groups > "elasticsearch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [elasticsearch+unsubscribe@googlegroups.com](mailto:elasticsearch+unsubscribe@googlegroups.com). > To view this discussion on the web visit > [https://groups.google.com/d/msgid/elasticsearch/CAEM624a6tk9jqGkh\_ED%3Dx\_bpJPxpiydP9\_KxTugrBVZuX5yaCw%40mail.gmail.com](https://groups.google.com/d/msgid/elasticsearch/CAEM624a6tk9jqGkh_ED%3Dx_bpJPxpiydP9_KxTugrBVZuX5yaCw%40mail.gmail.com). > For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout). -- You received this message because you are subscribed to the Google Groups "elasticsearch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [elasticsearch+unsubscribe@googlegroups.com](mailto:elasticsearch+unsubscribe@googlegroups.com). To view this discussion on the web visit [https://groups.google.com/d/msgid/elasticsearch/CAH0sEYjc5DAO4mW%2B%3DnrgDfxbEd%2BYxwcn1vZ9jXxBNm1N%2BH9%3D1Q%40mail.gmail.com](https://groups.google.com/d/msgid/elasticsearch/CAH0sEYjc5DAO4mW%2B%3DnrgDfxbEd%2BYxwcn1vZ9jXxBNm1N%2BH9%3D1Q%40mail.gmail.com). For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout). ---
**Author:** ![Itamar\_Syn\_Hershko](https://sea2.discourse-cdn.com/elastic/user_avatar/discuss.elastic.co/itamar_syn_hershko/32/725_2.png) [@Itamar\_Syn\_Hershko](https://discuss.elastic.co/u/Itamar_Syn_Hershko)\ **Post date:** [May 16, 2014, 1:31pm UTC](https://discuss.elastic.co/t/disk-based-shard-allocation-per-node-settings/17544/4 "2014-05-16T13:31:11Z")
The link you provided is for transient settings, meaning they will reset once the cluster restarts. Doing this via the configurations file ensures the settings are loaded back. As Mark said, this is cluster level settings. If you have nodes with different HD characteristics you probably want to use percentages for the watermark values. -- Itamar Syn-Hershko [http://code972.com](http://code972.com) | @synhershko [https://twitter.com/synhershko](https://twitter.com/synhershko) Freelance Developer & Consultant Author of RavenDB in Action [http://manning.com/synhershko/](http://manning.com/synhershko/) On Fri, May 16, 2014 at 3:26 PM, Michel Conrad \< [michel.conrad@trendiction.com](mailto:michel.conrad@trendiction.com)\> wrote: > What if I set the option in the configuration file, will it then only > be applied to the node reading the configuration file? > > On Fri, May 16, 2014 at 10:36 AM, Mark Walkom [markw@campaignmonitor.com](mailto:markw@campaignmonitor.com) > wrote: > > > It's a cluster level setting, so all nodes use the same one. > > As far as I know, there is no node level setting. > > > > Regards, > > Mark Walkom > > > > Infrastructure Engineer > > Campaign Monitor > > email: [markw@campaignmonitor.com](mailto:markw@campaignmonitor.com) > > web: [www.campaignmonitor.com](http://www.campaignmonitor.com) > > > > On 16 May 2014 17:43, Michel Conrad [michel.conrad@trendiction.com](mailto:michel.conrad@trendiction.com) > > wrote: > > > > > Is it possible to specify different thresholds for different nodes in > > > the cluster? I could not find it in the documentation, when updating > > > the setting through the cluster settings as described on > > [Elasticsearch Platform — Find real-time answers at scale | Elastic](http://www.elasticsearch.org/guide/en/elasticsearch/reference/current/index-modules-allocation.html#disk) > > > > the threshold is applied to every node. > > > > > > When specifing the thresholds through the configuration file, will it > > > then be only applied to the node reading the configuration? In this > > > case how to I prevent the cluster settings being applied and > > > overwriting the configuration file (remove a setting). > > > > > > Thanks for any thoughts, > > > Michel > > > > > > -- > > > You received this message because you are subscribed to the Google > > > Groups > > > "elasticsearch" group. > > > To unsubscribe from this group and stop receiving emails from it, send > > > an > > > email to [elasticsearch+unsubscribe@googlegroups.com](mailto:elasticsearch+unsubscribe@googlegroups.com). > > > To view this discussion on the web visit > > [https://groups.google.com/d/msgid/elasticsearch/CAH0sEYgM4%3DmH2cA3wJoBQAmx82ddrz6N%3D8u3XE0EFoKoOwTUUQ%40mail.gmail.com](https://groups.google.com/d/msgid/elasticsearch/CAH0sEYgM4%3DmH2cA3wJoBQAmx82ddrz6N%3D8u3XE0EFoKoOwTUUQ%40mail.gmail.com) > . > > > > For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout). > > > > -- > > You received this message because you are subscribed to the Google Groups > > "elasticsearch" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [elasticsearch+unsubscribe@googlegroups.com](mailto:elasticsearch+unsubscribe@googlegroups.com). > > To view this discussion on the web visit > > [https://groups.google.com/d/msgid/elasticsearch/CAEM624a6tk9jqGkh\_ED%3Dx\_bpJPxpiydP9\_KxTugrBVZuX5yaCw%40mail.gmail.com](https://groups.google.com/d/msgid/elasticsearch/CAEM624a6tk9jqGkh_ED%3Dx_bpJPxpiydP9_KxTugrBVZuX5yaCw%40mail.gmail.com) > . > > > For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout). > > -- > You received this message because you are subscribed to the Google Groups > "elasticsearch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [elasticsearch+unsubscribe@googlegroups.com](mailto:elasticsearch+unsubscribe@googlegroups.com). > To view this discussion on the web visit > [https://groups.google.com/d/msgid/elasticsearch/CAH0sEYjc5DAO4mW%2B%3DnrgDfxbEd%2BYxwcn1vZ9jXxBNm1N%2BH9%3D1Q%40mail.gmail.com](https://groups.google.com/d/msgid/elasticsearch/CAH0sEYjc5DAO4mW%2B%3DnrgDfxbEd%2BYxwcn1vZ9jXxBNm1N%2BH9%3D1Q%40mail.gmail.com) > . > For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout). -- You received this message because you are subscribed to the Google Groups "elasticsearch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [elasticsearch+unsubscribe@googlegroups.com](mailto:elasticsearch+unsubscribe@googlegroups.com). To view this discussion on the web visit [https://groups.google.com/d/msgid/elasticsearch/CAHTr4ZtTZfb%2B0uJSxohd685pCAcEgxZXSg\_SYeu9izq%3D4\_1zjQ%40mail.gmail.com](https://groups.google.com/d/msgid/elasticsearch/CAHTr4ZtTZfb%2B0uJSxohd685pCAcEgxZXSg_SYeu9izq%3D4_1zjQ%40mail.gmail.com). For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout). ---
**Author:** ![Andrew\_Mehler](https://avatars.discourse-cdn.com/v4/letter/a/41988e/32.png) [@Andrew\_Mehler](https://discuss.elastic.co/u/Andrew_Mehler)\ **Post date:** [October 2, 2014, 9:18pm UTC](https://discuss.elastic.co/t/disk-based-shard-allocation-per-node-settings/17544/5 "2014-10-02T21:18:55Z")
If I hava multiple data dirs on a node, can I apply these settings to each directory individually? On Friday, May 16, 2014 9:31:11 AM UTC-4, Itamar Syn-Hershko wrote: > The link you provided is for transient settings, meaning they will reset > once the cluster restarts. Doing this via the configurations file ensures > the settings are loaded back. > > As Mark said, this is cluster level settings. If you have nodes with > different HD characteristics you probably want to use percentages for the > watermark values. > > -- > > Itamar Syn-Hershko > [http://code972.com](http://code972.com) | @synhershko [https://twitter.com/synhershko](https://twitter.com/synhershko) > Freelance Developer & Consultant > Author of RavenDB in Action [http://manning.com/synhershko/](http://manning.com/synhershko/) > > On Fri, May 16, 2014 at 3:26 PM, Michel Conrad \<[michel...@trendiction.com](mailto:michel...@trendiction.com) > \\> wrote: > > > What if I set the option in the configuration file, will it then only > > be applied to the node reading the configuration file? > > > > On Fri, May 16, 2014 at 10:36 AM, Mark Walkom \<[ma...@campaignmonitor.com](mailto:ma...@campaignmonitor.com) > > \\> wrote: > > > > > It's a cluster level setting, so all nodes use the same one. > > > As far as I know, there is no node level setting. > > > > > > Regards, > > > Mark Walkom > > > > > > Infrastructure Engineer > > > Campaign Monitor > > > email: [ma...@campaignmonitor.com](mailto:ma...@campaignmonitor.com) \ > > > web: [www.campaignmonitor.com](http://www.campaignmonitor.com) > > > > > > On 16 May 2014 17:43, Michel Conrad \<[michel...@trendiction.com](mailto:michel...@trendiction.com) > > > \\> wrote: > > > > > > > Is it possible to specify different thresholds for different nodes in > > > > the cluster? I could not find it in the documentation, when updating > > > > the setting through the cluster settings as described on > > > > [Elasticsearch Platform — Find real-time answers at scale | Elastic](http://www.elasticsearch.org/guide/en/elasticsearch/reference/current/index-modules-allocation.html#disk) > > > > > > the threshold is applied to every node. > > > > > > > > When specifing the thresholds through the configuration file, will it > > > > then be only applied to the node reading the configuration? In this > > > > case how to I prevent the cluster settings being applied and > > > > overwriting the configuration file (remove a setting). > > > > > > > > Thanks for any thoughts, > > > > Michel > > > > > > > > -- > > > > You received this message because you are subscribed to the Google > > > > Groups > > > > "elasticsearch" group. > > > > To unsubscribe from this group and stop receiving emails from it, send > > > > an > > > > email to [elasticsearc...@googlegroups.com](mailto:elasticsearc...@googlegroups.com) \. > > > > To view this discussion on the web visit > > > > [https://groups.google.com/d/msgid/elasticsearch/CAH0sEYgM4%3DmH2cA3wJoBQAmx82ddrz6N%3D8u3XE0EFoKoOwTUUQ%40mail.gmail.com](https://groups.google.com/d/msgid/elasticsearch/CAH0sEYgM4%3DmH2cA3wJoBQAmx82ddrz6N%3D8u3XE0EFoKoOwTUUQ%40mail.gmail.com) > > . > > > > > > For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout). > > > > > > -- > > > You received this message because you are subscribed to the Google > > > Groups > > > "elasticsearch" group. > > > To unsubscribe from this group and stop receiving emails from it, send > > > an > > > email to [elasticsearc...@googlegroups.com](mailto:elasticsearc...@googlegroups.com) \. > > > To view this discussion on the web visit > > > > [https://groups.google.com/d/msgid/elasticsearch/CAEM624a6tk9jqGkh\_ED%3Dx\_bpJPxpiydP9\_KxTugrBVZuX5yaCw%40mail.gmail.com](https://groups.google.com/d/msgid/elasticsearch/CAEM624a6tk9jqGkh_ED%3Dx_bpJPxpiydP9_KxTugrBVZuX5yaCw%40mail.gmail.com) > > . > > > > > For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout). > > > > -- > > You received this message because you are subscribed to the Google Groups > > "elasticsearch" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [elasticsearc...@googlegroups.com](mailto:elasticsearc...@googlegroups.com) \. > > To view this discussion on the web visit > > [https://groups.google.com/d/msgid/elasticsearch/CAH0sEYjc5DAO4mW%2B%3DnrgDfxbEd%2BYxwcn1vZ9jXxBNm1N%2BH9%3D1Q%40mail.gmail.com](https://groups.google.com/d/msgid/elasticsearch/CAH0sEYjc5DAO4mW%2B%3DnrgDfxbEd%2BYxwcn1vZ9jXxBNm1N%2BH9%3D1Q%40mail.gmail.com) > > . > > For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout). -- You received this message because you are subscribed to the Google Groups "elasticsearch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [elasticsearch+unsubscribe@googlegroups.com](mailto:elasticsearch+unsubscribe@googlegroups.com). To view this discussion on the web visit [https://groups.google.com/d/msgid/elasticsearch/63097500-b95f-49a4-a5de-190c15ecdb32%40googlegroups.com](https://groups.google.com/d/msgid/elasticsearch/63097500-b95f-49a4-a5de-190c15ecdb32%40googlegroups.com). For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout). ---
**Author:** ![warkolm](https://sea2.discourse-cdn.com/elastic/user_avatar/discuss.elastic.co/warkolm/32/39224_2.png) [@warkolm](https://discuss.elastic.co/u/warkolm)\ **Post date:** [October 2, 2014, 9:32pm UTC](https://discuss.elastic.co/t/disk-based-shard-allocation-per-node-settings/17544/6 "2014-10-02T21:32:34Z")
Nope, it's for the node as a whole. Regards, Mark Walkom Infrastructure Engineer Campaign Monitor email: [markw@campaignmonitor.com](mailto:markw@campaignmonitor.com) web: [www.campaignmonitor.com](http://www.campaignmonitor.com) On 3 October 2014 07:18, Andrew Mehler [mehler@gmail.com](mailto:mehler@gmail.com) wrote: > If I hava multiple data dirs on a node, can I apply these settings to each > directory individually? > > On Friday, May 16, 2014 9:31:11 AM UTC-4, Itamar Syn-Hershko wrote: > > > The link you provided is for transient settings, meaning they will reset > > once the cluster restarts. Doing this via the configurations file ensures > > the settings are loaded back. > > > > As Mark said, this is cluster level settings. If you have nodes with > > different HD characteristics you probably want to use percentages for the > > watermark values. > > > > -- > > > > Itamar Syn-Hershko > > [http://code972.com](http://code972.com) | @synhershko [https://twitter.com/synhershko](https://twitter.com/synhershko) > > Freelance Developer & Consultant > > Author of RavenDB in Action [http://manning.com/synhershko/](http://manning.com/synhershko/) > > > > On Fri, May 16, 2014 at 3:26 PM, Michel Conrad \<[michel...@trendiction.com](mailto:michel...@trendiction.com) > > > > > wrote: > > > > > What if I set the option in the configuration file, will it then only > > > be applied to the node reading the configuration file? > > > > > > On Fri, May 16, 2014 at 10:36 AM, Mark Walkom [ma...@campaignmonitor.com](mailto:ma...@campaignmonitor.com) > > > wrote: > > > > > > > It's a cluster level setting, so all nodes use the same one. > > > > As far as I know, there is no node level setting. > > > > > > > > Regards, > > > > Mark Walkom > > > > > > > > Infrastructure Engineer > > > > Campaign Monitor > > > > email: [ma...@campaignmonitor.com](mailto:ma...@campaignmonitor.com) > > > > web: [www.campaignmonitor.com](http://www.campaignmonitor.com) > > > > > > > > On 16 May 2014 17:43, Michel Conrad [michel...@trendiction.com](mailto:michel...@trendiction.com) wrote: > > > > > > > > > Is it possible to specify different thresholds for different nodes in > > > > > the cluster? I could not find it in the documentation, when updating > > > > > the setting through the cluster settings as described on > > > > > > > > > > [Elasticsearch Platform — Find real-time answers at scale | Elastic](http://www.elasticsearch.org/guide/en/elasticsearch/) > > > > > reference/current/index-modules-allocation.html#disk > > > > > the threshold is applied to every node. > > > > > > > > > > When specifing the thresholds through the configuration file, will it > > > > > then be only applied to the node reading the configuration? In this > > > > > case how to I prevent the cluster settings being applied and > > > > > overwriting the configuration file (remove a setting). > > > > > > > > > > Thanks for any thoughts, > > > > > Michel > > > > > > > > > > -- > > > > > You received this message because you are subscribed to the Google > > > > > Groups > > > > > "elasticsearch" group. > > > > > To unsubscribe from this group and stop receiving emails from it, > > > > > send an > > > > > email to [elasticsearc...@googlegroups.com](mailto:elasticsearc...@googlegroups.com). > > > > > To view this discussion on the web visit > > > > > [https://groups.google.com/d/msgid/elasticsearch/CAH0sEYgM4%](https://groups.google.com/d/msgid/elasticsearch/CAH0sEYgM4%25) > > > > > 3DmH2cA3wJoBQAmx82ddrz6N%3D8u3XE0EFoKoOwTUUQ%[40mail.gmail.com](http://40mail.gmail.com). > > > > > For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout). > > > > > > > > -- > > > > You received this message because you are subscribed to the Google > > > > Groups > > > > "elasticsearch" group. > > > > To unsubscribe from this group and stop receiving emails from it, send > > > > an > > > > email to [elasticsearc...@googlegroups.com](mailto:elasticsearc...@googlegroups.com). > > > > To view this discussion on the web visit > > > > [https://groups.google.com/d/msgid/elasticsearch/](https://groups.google.com/d/msgid/elasticsearch/) > > > > CAEM624a6tk9jqGkh\_ED%3Dx\_bpJPxpiydP9\_KxTugrBVZuX5yaCw%[40mail.gmail.com](http://40mail.gmail.com). > > > > For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout). > > > > > > -- > > > You received this message because you are subscribed to the Google > > > Groups "elasticsearch" group. > > > To unsubscribe from this group and stop receiving emails from it, send > > > an email to [elasticsearc...@googlegroups.com](mailto:elasticsearc...@googlegroups.com). > > > To view this discussion on the web visit [https://groups.google.com/d/](https://groups.google.com/d/) > > > msgid/elasticsearch/CAH0sEYjc5DAO4mW%2B%3DnrgDfxbEd% > > > 2BYxwcn1vZ9jXxBNm1N%2BH9%3D1Q%[40mail.gmail.com](http://40mail.gmail.com). > > > For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout). > > > > -- > > You received this message because you are subscribed to the Google Groups > > "elasticsearch" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [elasticsearch+unsubscribe@googlegroups.com](mailto:elasticsearch+unsubscribe@googlegroups.com). > > To view this discussion on the web visit > > [https://groups.google.com/d/msgid/elasticsearch/63097500-b95f-49a4-a5de-190c15ecdb32%40googlegroups.com](https://groups.google.com/d/msgid/elasticsearch/63097500-b95f-49a4-a5de-190c15ecdb32%40googlegroups.com) > > [https://groups.google.com/d/msgid/elasticsearch/63097500-b95f-49a4-a5de-190c15ecdb32%40googlegroups.com?utm\_medium=email&utm\_source=footer](https://groups.google.com/d/msgid/elasticsearch/63097500-b95f-49a4-a5de-190c15ecdb32%40googlegroups.com?utm_medium=email&utm_source=footer) > > . > > For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout). -- You received this message because you are subscribed to the Google Groups "elasticsearch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [elasticsearch+unsubscribe@googlegroups.com](mailto:elasticsearch+unsubscribe@googlegroups.com). To view this discussion on the web visit [https://groups.google.com/d/msgid/elasticsearch/CAEM624baF4J1DxJBE\_X%2BoCg29NG0jrnFZGzPXoTmMt6F9sqHsg%40mail.gmail.com](https://groups.google.com/d/msgid/elasticsearch/CAEM624baF4J1DxJBE_X%2BoCg29NG0jrnFZGzPXoTmMt6F9sqHsg%40mail.gmail.com). For more options, visit [https://groups.google.com/d/optout](https://groups.google.com/d/optout). ---
**Author:** ![system](https://us1.discourse-cdn.com/elastic/original/3X/1/a/1ac57faf039f6b580b3f104ef42a2a89e41014de.png) [@system](https://discuss.elastic.co/u/system)\ **Post date:** [July 6, 2017, 12:58am UTC](https://discuss.elastic.co/t/disk-based-shard-allocation-per-node-settings/17544/7 "2017-07-06T00:58:33Z")