# Elastic Endgame Sensor **URL:** \ **Category:** Endpoint Security\ **Created:** [October 17, 2021, 5:32pm UTC](https://discuss.elastic.co/t/elastic-endgame-sensor/286933 "2021-10-17T17:32:25Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![marisa.david](https://avatars.discourse-cdn.com/v4/letter/m/278dde/32.png) [@marisa.david](https://discuss.elastic.co/u/marisa.david)\ **Post date:** [October 17, 2021, 5:32pm UTC](https://discuss.elastic.co/t/elastic-endgame-sensor/286933/1 "2021-10-17T17:32:25Z")
I have been attempting to deploy a sensor but every time I try to in the command prompt it says it cannot be found. I am not sure if I am putting the information in wrong. ---
**Author:** ![n2x4](https://avatars.discourse-cdn.com/v4/letter/n/3e96dc/32.png) [@n2x4](https://discuss.elastic.co/u/n2x4)\ **Post date:** [October 17, 2021, 9:43pm UTC](https://discuss.elastic.co/t/elastic-endgame-sensor/286933/2 "2021-10-17T21:43:08Z")
What command are you using? ---
**Author:** ![marisa.david](https://avatars.discourse-cdn.com/v4/letter/m/278dde/32.png) [@marisa.david](https://discuss.elastic.co/u/marisa.david)\ **Post date:** [October 17, 2021, 11:29pm UTC](https://discuss.elastic.co/t/elastic-endgame-sensor/286933/3 "2021-10-17T23:29:39Z")
I am at the administrator command prompt part where you change the directory into the Windows folder of the directory you previously extracted. The command reads: > cd C:\Users\trainee\Downloads\SensorInstaller-Demo\windows\>SensorWindowsInstaller-Demo.exe -c SensorWindowsInstaller-Demo.cfg -k BDE27DC5A3CA4D8B1623 -d false -l install.log When I press enter I get, "The system cannot find the path specified." Not sure if I am reading the instructions wrong on how to input it. ---
**Author:** ![n2x4](https://avatars.discourse-cdn.com/v4/letter/n/3e96dc/32.png) [@n2x4](https://discuss.elastic.co/u/n2x4)\ **Post date:** [October 18, 2021, 11:54am UTC](https://discuss.elastic.co/t/elastic-endgame-sensor/286933/4 "2021-10-18T11:54:35Z")
That should be two commands. The first is the CD (Change Directory) command into your path where the sensor was downloaded to - ```auto cd C:\Users\trainee\Downloads\SensorInstaller-Demo\windows ``` The second command should be your install referencing your config - ```auto SensorWindowsInstaller-Demo.exe -c SensorWindowsInstaller-Demo.cfg -k BDE27DC5A3CA4D8B1623 -d false -l install.log ``` In your example it looks like you were trying to combine the "cd" and execution which caused the "cd" command to look for a path that was equal to the sensor install command, which would not exist. ---
**Author:** ![marisa.david](https://avatars.discourse-cdn.com/v4/letter/m/278dde/32.png) [@marisa.david](https://discuss.elastic.co/u/marisa.david)\ **Post date:** [October 18, 2021, 8:17pm UTC](https://discuss.elastic.co/t/elastic-endgame-sensor/286933/5 "2021-10-18T20:17:03Z")
I put in the command prompt cd C:\Users\trainee\Downloads\SensorInstaller-Demo\windows Upon hitting enter I was given “the system cannot find the path specified.” ---
**Author:** ![n2x4](https://avatars.discourse-cdn.com/v4/letter/n/3e96dc/32.png) [@n2x4](https://discuss.elastic.co/u/n2x4)\ **Post date:** [October 19, 2021, 1:28am UTC](https://discuss.elastic.co/t/elastic-endgame-sensor/286933/6 "2021-10-19T01:28:19Z")
Sounds like you need to check where you downloaded the installer to and verify you can browse to the path. The "system can't find the path" error is a Windows error and not Elastic - it means the directory doesn't exist. ---
**Author:** ![system](https://us1.discourse-cdn.com/elastic/original/3X/1/a/1ac57faf039f6b580b3f104ef42a2a89e41014de.png) [@system](https://discuss.elastic.co/u/system)\ **Post date:** [November 16, 2021, 1:28am UTC](https://discuss.elastic.co/t/elastic-endgame-sensor/286933/7 "2021-11-16T01:28:33Z")
This topic was automatically closed 28 days after the last reply. New replies are no longer allowed.