# Filebeat dashboards are not loaded in kibana---filebeat version 7.10

**URL:** <https://discuss.elastic.co/t/filebeat-dashboards-are-not-loaded-in-kibana-filebeat-version-7-10/257933>\
**Category:** Beats\
**Tags:** filebeat\
**Created:** [December 8, 2020, 4:50am UTC](https://discuss.elastic.co/t/filebeat-dashboards-are-not-loaded-in-kibana-filebeat-version-7-10/257933 "2020-12-08T04:50:52Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![prakash22](https://avatars.discourse-cdn.com/v4/letter/p/f1d935/32.png) [@prakash22](https://discuss.elastic.co/u/prakash22)\
**Post date:** [December 8, 2020, 4:50am UTC](https://discuss.elastic.co/t/filebeat-dashboards-are-not-loaded-in-kibana-filebeat-version-7-10/257933/1 "2020-12-08T04:50:53Z")

</div>

# 2020-12-08T09:58:34.256+0530 INFO instance/beat.go:299 Setup Beat: filebeat; Version: 7.10.0 2020-12-08T09:58:34.256+0530 DEBUG [beat] instance/beat.go:325 Initializing output plugins 2020-12-08T09:58:34.256+0530 DEBUG [publisher] pipeline/consumer.go:148 start pipeline event consumer 2020-12-08T09:58:34.256+0530 INFO [publisher] pipeline/module.go:113 Beat name: ip-16-0-3-159 2020-12-08T09:58:34.258+0530 WARN beater/filebeat.go:178 Filebeat is unable to load the Ingest Node pipelines for the configured modules because the Elasticsearch output is not configured/enabled. If you have already loaded the Ingest Node pipelines or are using Logstash pipelines, you can ignore this warning. 2020-12-08T09:58:34.258+0530 ERROR instance/beat.go:956 Exiting: Index management requested but the Elasticsearch output is not configured/enabled Exiting: Index management requested but the Elasticsearch output is not configured/enabled

This is my filebeat.yml file  
###################### Filebeat Configuration Example #########################

# This file is an example configuration file highlighting only the most common

# options. The filebeat.reference.yml file from the same directory contains all the

# supported options with more comments. You can use it as a reference.

# 

# You can find the full configuration reference here:

# [https://www.elastic.co/guide/en/beats/filebeat/index.html](https://www.elastic.co/guide/en/beats/filebeat/index.html)

# For more available modules and options, please see the filebeat.reference.yml sample

# configuration file.

# ============================== Filebeat inputs ===============================

filebeat.inputs:

# Each - is an input. Most options can be set at the input level, so

# you can use different inputs for various configurations.

# Below are the input specific configurations.

- type: log

# - /var/log/\*.log

```
#- c:\programdata\elasticsearch\logs\*
- '/pappaya/testryan/logs/odoo-server.log'

```

exclude\_files: ['.gz$']

# Exclude lines. A list of regular expressions to match. It drops the lines that are

# matching any regular expression from the list.

#exclude\_lines: ['^DBG']

# Include lines. A list of regular expressions to match. It exports the lines that are

# matching any regular expression from the list.

#include\_lines: ['^ERR', '^WARN']

# Exclude files. A list of regular expressions to match. Filebeat drops the files that

# are matching any regular expression from the list. By default, no files are dropped.

#exclude\_files: ['.gz$']

# Optional additional fields. These fields can be freely picked

# to add additional information to the crawled log files for filtering

#fields:

# level: debug

# review: 1

### Multiline options

# Multiline can be used for log messages spanning multiple lines. This is common

# for Java Stack Traces or C-Line Continuation

# The regexp Pattern that has to be matched. The example pattern matches all lines starting with [

#multiline.pattern: ^[

# Defines if the pattern set under pattern should be negated or not. Default is false.

#multiline.negate: false

# Match can be set to "after" or "before". It is used to define if lines should be append to a pattern

# that was (not) matched before or after or as long as a pattern is not matched based on negate.

# Note: After is the equivalent to previous and before is the equivalent to to next in Logstash

#multiline.match: after

# filestream is an experimental input. It is going to replace log input in the future.

- type: filestream

# - /var/log/\*.log

```
#- c:\programdata\elasticsearch\logs\*

```

# Exclude lines. A list of regular expressions to match. It drops the lines that are

# matching any regular expression from the list.

#exclude\_lines: ['^DBG']

# Include lines. A list of regular expressions to match. It exports the lines that are

# matching any regular expression from the list.

#include\_lines: ['^ERR', '^WARN']

# Exclude files. A list of regular expressions to match. Filebeat drops the files that

# are matching any regular expression from the list. By default, no files are dropped.

#prospector.scanner.exclude\_files: ['.gz$']

# Optional additional fields. These fields can be freely picked

# to add additional information to the crawled log files for filtering

#fields:

# level: debug

# review: 1

# ============================== Filebeat modules ==============================

filebeat.config.modules:

# Glob pattern for configuration loading

path: ${path.config}/modules.d/\*.yml

# Set to true to enable config reloading

reload.enabled: true

# Period on which files under path should be checked for changes

#reload.period: 10s

# ======================= Elasticsearch template setting =======================

setup.template.settings:  
index.number\_of\_shards: 1  
#index.codec: best\_compression  
#\_source.enabled: false

# ================================== General ===================================

# The name of the shipper that publishes the network data. It can be used to group

# all the transactions sent by a single shipper in the web interface.

#name:

# The tags of the shipper are included in their own field with each

# transaction published.

#tags: ["service-X", "web-tier"]

# Optional fields that you can specify to add additional information to the

# output.

#fields:

# env: staging

# ================================= Dashboards =================================

# These settings control loading the sample dashboards to the Kibana index. Loading

# the dashboards is disabled by default and can be enabled either by setting the

# options here or by using the `setup` command.

#setup.dashboards.enabled: true

# The URL from where to download the dashboards archive. By default this URL

# has a value which is computed based on the Beat name and version. For released

# versions, this URL points to the dashboard archive on the [artifacts.elastic.co](http://artifacts.elastic.co)

# website.

#setup.dashboards.url:

# =================================== Kibana ===================================

# Starting with Beats version 6.0.0, the dashboards are loaded via the Kibana API.

# This requires a Kibana endpoint configuration.

setup.kibana:

# Kibana Host

# Scheme and port can be left out and will be set to the default (http and 5601)

# In case you specify and additional path, the scheme is required: [http://localhost:5601/path](http://localhost:5601/path)

# IPv6 addresses should always be defined as: https://[2001:db8::1]:5601

#host: "localhost:5601"

# Kibana Space ID

# ID of the Kibana Space into which the dashboards should be loaded. By default,

# the Default Space will be used.

#space.id:

# =============================== Elastic Cloud ================================

# These settings simplify using Filebeat with the Elastic Cloud ([https://cloud.elastic.co/](https://cloud.elastic.co/)).

# The cloud.id setting overwrites the `output.elasticsearch.hosts` and

# `setup.kibana.host` options.

# You can find the `cloud.id` in the Elastic Cloud web UI.

#cloud.id:

# The cloud.auth setting overwrites the `output.elasticsearch.username` and

# `output.elasticsearch.password` settings. The format is `<user>:<pass>`.

#cloud.auth:

# ================================== Outputs ===================================

# Configure what output to use when sending the data collected by the beat.

# ---------------------------- Elasticsearch Output ----------------------------

#output.elasticsearch:

# Array of hosts to connect to.

# hosts: ["localhost:9200"]

# Protocol - either `http` (default) or `https`.

#protocol: "https"

# Authentication credentials - either API key or username/password.

#api\_key: "id:api\_key"  
#username: "elastic"  
#password: "changeme"

# ------------------------------ Logstash Output -------------------------------

output.logstash:

# The Logstash hosts

hosts: ["10.1.3.4:5044"]

#setup.ilm.enabled: false  
#ilm.enabled: false

# Optional SSL. By default is off.

# List of root certificates for HTTPS server verifications

#ssl.certificate\_authorities: ["/etc/pki/root/ca.pem"]

# Certificate for SSL client authentication

#ssl.certificate: "/etc/pki/client/cert.pem"

# Client Certificate Key

#ssl.key: "/etc/pki/client/cert.key"

# ================================= Processors =================================

processors:

- add\_host\_metadata:  
when.not.contains.tags: forwarded
- add\_cloud\_metadata: ~
- add\_docker\_metadata: ~
- add\_kubernetes\_metadata: ~

# ================================== Logging ===================================

# Sets log level. The default log level is info.

# Available log levels are: error, warning, info, debug

#logging.level: debug  
logging.level: debug  
logging.to\_files: true  
logging.files:  
path: /var/log/filebeat  
name: filebeat  
keepfiles: 7  
permissions: 0644

# At debug level, you can selectively enable logging only for some components.

# To enable all selectors use ["\*"]. Examples of other selectors are "beat",

# "publish", "service".

#logging.selectors: ["\*"]

# ============================= X-Pack Monitoring ==============================

# Filebeat can export internal metrics to a central Elasticsearch monitoring

# cluster. This requires xpack monitoring to be enabled in Elasticsearch. The

# reporting is disabled by default.

# Set to true to enable the monitoring reporter.

#monitoring.enabled: false

# Sets the UUID of the Elasticsearch cluster under which monitoring data for this

# Filebeat instance will appear in the Stack Monitoring UI. If output.elasticsearch

# is enabled, the UUID is derived from the Elasticsearch cluster referenced by output.elasticsearch.

#monitoring.cluster\_uuid:

# Uncomment to send the metrics to Elasticsearch. Most settings from the

# Elasticsearch output are accepted here as well.

# Note that the settings should point to your Elasticsearch _monitoring_ cluster.

# Any setting that is not set is automatically inherited from the Elasticsearch

# output configuration, so if you have the Elasticsearch output configured such

# that it is pointing to your Elasticsearch monitoring cluster, you can simply

# uncomment the following line.

#monitoring.elasticsearch:

# ============================== Instrumentation ===============================

# Instrumentation support for the filebeat.

#instrumentation:  
# Set to true to enable instrumentation of filebeat.  
#enabled: false

```
# Environment in which filebeat is running on (eg: staging, production, etc.)
#environment: ""

# APM Server hosts to report instrumentation results to.
#hosts:
# - http://localhost:8200

# API Key for the APM Server(s).
# If api_key is set then secret_token will be ignored.
#api_key:

# Secret token for the APM Server(s).
#secret_token:

```

# ================================= Migration ==================================

# This allows to enable 6.7 migration aliases

#migration.6\_to\_7.enabled: true  
queue.mem:  
events: 8000  
flush.min\_events: 2000  
flush.timeout: 10s

# #setup.template.enabled: false

Thanks,Please help on this

---

<div class="post-metadata">

**Author:** ![warkolm](https://sea2.discourse-cdn.com/elastic/user_avatar/discuss.elastic.co/warkolm/32/39224_2.png) [@warkolm](https://discuss.elastic.co/u/warkolm)\
**Post date:** [December 8, 2020, 6:55am UTC](https://discuss.elastic.co/t/filebeat-dashboards-are-not-loaded-in-kibana-filebeat-version-7-10/257933/2 "2020-12-08T06:55:24Z")

</div>

Welcome to our community! 😃

Please format your code/logs/config using the `</>` button, or markdown style back ticks. It helps to make things easy to read which helps us help you. It's extremely hard to read as it is now 🙂

---

<div class="post-metadata">

**Author:** ![prakash22](https://avatars.discourse-cdn.com/v4/letter/p/f1d935/32.png) [@prakash22](https://discuss.elastic.co/u/prakash22)\
**Post date:** [December 8, 2020, 6:56am UTC](https://discuss.elastic.co/t/filebeat-dashboards-are-not-loaded-in-kibana-filebeat-version-7-10/257933/3 "2020-12-08T06:56:47Z")

</div>

Hai warkolm,

Please help me on above issue

Thanks  
prakash

---

<div class="post-metadata">

**Author:** ![prakash22](https://avatars.discourse-cdn.com/v4/letter/p/f1d935/32.png) [@prakash22](https://discuss.elastic.co/u/prakash22)\
**Post date:** [December 8, 2020, 7:30am UTC](https://discuss.elastic.co/t/filebeat-dashboards-are-not-loaded-in-kibana-filebeat-version-7-10/257933/5 "2020-12-08T07:30:37Z")

</div>

![Error](https://us1.discourse-cdn.com/elastic/original/3X/6/3/6305e7c5f9ab8d7de7c2c528c3ebfa808495b260.jpeg)

Please check the error

---

<div class="post-metadata">

**Author:** ![warkolm](https://sea2.discourse-cdn.com/elastic/user_avatar/discuss.elastic.co/warkolm/32/39224_2.png) [@warkolm](https://discuss.elastic.co/u/warkolm)\
**Post date:** [December 8, 2020, 8:11pm UTC](https://discuss.elastic.co/t/filebeat-dashboards-are-not-loaded-in-kibana-filebeat-version-7-10/257933/6 "2020-12-08T20:11:49Z")

</div>

Please don't post pictures of text, they are difficult to read, impossible to search and replicate (if it's code), and some people may not be even able to see them 🙂

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/elastic/original/3X/1/a/1ac57faf039f6b580b3f104ef42a2a89e41014de.png) [@system](https://discuss.elastic.co/u/system)\
**Post date:** [January 5, 2021, 10:11pm UTC](https://discuss.elastic.co/t/filebeat-dashboards-are-not-loaded-in-kibana-filebeat-version-7-10/257933/7 "2021-01-05T22:11:54Z")

</div>

This topic was automatically closed 28 days after the last reply. New replies are no longer allowed.