# Kibana warning on control visualization: "Terms list might be incomplete ..."

**URL:** <https://discuss.elastic.co/t/kibana-warning-on-control-visualization-terms-list-might-be-incomplete/228338>\
**Category:** Kibana\
**Created:** [April 16, 2020, 2:21pm UTC](https://discuss.elastic.co/t/kibana-warning-on-control-visualization-terms-list-might-be-incomplete/228338 "2020-04-16T14:21:17Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![tomj](https://avatars.discourse-cdn.com/v4/letter/t/dfb087/32.png) [@tomj](https://discuss.elastic.co/u/tomj)\
**Post date:** [April 16, 2020, 2:21pm UTC](https://discuss.elastic.co/t/kibana-warning-on-control-visualization-terms-list-might-be-incomplete/228338/1 "2020-04-16T14:21:17Z")

</div>

Using Elastic Cloud with 7.6.2 and Kibana 7.6.2.

When opening any control visualization or a dashboard which uses the control visualization, I get the warning below.

The example cited here has exactly two terms, not dozens or hundreds.

The control renders fast enough, so I don't know what request is "taking too long".

When I look at the two autocomplete timeout settings (as documented) they both seem quite reasonable.

Is there perhaps another underlying cause?

 ![Screenshot from 2020-04-15 12-29-32](https://us1.discourse-cdn.com/elastic/original/3X/2/4/2463084b5d29c89c2c4fbc2f71749d5a4969862d.png)

---

<div class="post-metadata">

**Author:** ![flash1293](https://sea2.discourse-cdn.com/elastic/user_avatar/discuss.elastic.co/flash1293/32/41227_2.png) [@flash1293](https://discuss.elastic.co/u/flash1293)\
**Post date:** [April 16, 2020, 2:29pm UTC](https://discuss.elastic.co/t/kibana-warning-on-control-visualization-terms-list-might-be-incomplete/228338/2 "2020-04-16T14:29:06Z")

</div>

In your case there is no issue it all, the warning is just telling there might be an issue.

To populate this dropdown, Elasticsearch goes through all of your documents to see what terms are possible. When you have a lot of data, this can take quite a while which breaks the intended user experience of filters. This is why this request will time out early and just give you what it found so far, trading off performance and accuracy.

It basically says that it didn't look everywhere and there might be additional items it didn't found. If you know for sure there are no items missing, you can just ignore it.

---

<div class="post-metadata">

**Author:** ![tomj](https://avatars.discourse-cdn.com/v4/letter/t/dfb087/32.png) [@tomj](https://discuss.elastic.co/u/tomj)\
**Post date:** [April 16, 2020, 2:50pm UTC](https://discuss.elastic.co/t/kibana-warning-on-control-visualization-terms-list-might-be-incomplete/228338/3 "2020-04-16T14:50:42Z")

</div>

OK, thank you.

---

<div class="post-metadata">

**Author:** ![Pablo95](https://avatars.discourse-cdn.com/v4/letter/p/d26b3c/32.png) [@Pablo95](https://discuss.elastic.co/u/Pablo95)\
**Post date:** [May 9, 2020, 11:28am UTC](https://discuss.elastic.co/t/kibana-warning-on-control-visualization-terms-list-might-be-incomplete/228338/4 "2020-05-09T11:28:25Z")

</div>

I have the same issue. But in my case there is some data that is actually missing.

 ![image](https://us1.discourse-cdn.com/elastic/original/3X/8/7/87ecde45bdf08bb2fb8eb5d5c794a1b20da090a0.png)

In both of the filters data is missing.

How can I solve it?

Thanks a lot.

---

<div class="post-metadata">

**Author:** ![flash1293](https://sea2.discourse-cdn.com/elastic/user_avatar/discuss.elastic.co/flash1293/32/41227_2.png) [@flash1293](https://discuss.elastic.co/u/flash1293)\
**Post date:** [May 9, 2020, 11:43am UTC](https://discuss.elastic.co/t/kibana-warning-on-control-visualization-terms-list-might-be-incomplete/228338/5 "2020-05-09T11:43:47Z")

</div>

There are config settings in the kibana.yml file “kibana.autocompleteTimeout” and “kibana.autocompleteTerminateAfter”. You can increase the default values and restart Kibana, then the missing values should show up.

---

<div class="post-metadata">

**Author:** ![Pablo95](https://avatars.discourse-cdn.com/v4/letter/p/d26b3c/32.png) [@Pablo95](https://discuss.elastic.co/u/Pablo95)\
**Post date:** [May 9, 2020, 11:47am UTC](https://discuss.elastic.co/t/kibana-warning-on-control-visualization-terms-list-might-be-incomplete/228338/6 "2020-05-09T11:47:23Z")

</div>

> [@flash1293](#):
>
> are config settings in the kibana.yml file “

Thanks for the reply Jon. I've finally solve it.

What i just do was to unselect "Dynamic Options" option and set the number of options (Size) I wanted to show.

That solve the problem for me.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/elastic/original/3X/1/a/1ac57faf039f6b580b3f104ef42a2a89e41014de.png) [@system](https://discuss.elastic.co/u/system)\
**Post date:** [June 6, 2020, 11:47am UTC](https://discuss.elastic.co/t/kibana-warning-on-control-visualization-terms-list-might-be-incomplete/228338/7 "2020-06-06T11:47:31Z")

</div>

This topic was automatically closed 28 days after the last reply. New replies are no longer allowed.
