Error

C:\Program Files\Filebeat> .\filebeat.exe setup

Start-Service filebeat
Index setup finished.
Loading dashboards (Kibana must be running and reachable)
Exiting: error connecting to Kibana: fail to get the Kibana version: HTTP GET request to http://localhost:5601//api/status fails: . Response: {"statusCode":404,"error":"Not Found","message":"Not Found"}.

Hi I am getting this error. Could anyone please help me

Can you post your Filebeat config file? It looks like filebeat can't connect to your kibana server.

Are you talking about Filebeat.yml file?

###################### Filebeat Configuration Example #########################

This file is an example configuration file highlighting only the most common

options. The filebeat.reference.yml file from the same directory contains all the

supported options with more comments. You can use it as a reference.

You can find the full configuration reference here:

Filebeat Reference | Elastic

For more available modules and options, please see the filebeat.reference.yml sample

configuration file.

============================== Filebeat inputs ===============================

filebeat.inputs:

Each - is an input. Most options can be set at the input level, so

you can use different inputs for various configurations.

Below are the input specific configurations.

  • type: log

    Change to true to enable this input configuration.

    enabled: true

    Paths that should be crawled and fetched. Glob based paths.

    paths:
    #- /var/log/*.log

    • c:*

    Exclude lines. A list of regular expressions to match. It drops the lines that are

    matching any regular expression from the list.

    #exclude_lines: ['^DBG']

    Include lines. A list of regular expressions to match. It exports the lines that are

    matching any regular expression from the list.

    #include_lines: ['^ERR', '^WARN']

    Exclude files. A list of regular expressions to match. Filebeat drops the files that

    are matching any regular expression from the list. By default, no files are dropped.

    #exclude_files: ['.gz$']

    Optional additional fields. These fields can be freely picked

    to add additional information to the crawled log files for filtering

    #fields:

    level: debug

    review: 1

    Multiline options

    Multiline can be used for log messages spanning multiple lines. This is common

    for Java Stack Traces or C-Line Continuation

    The regexp Pattern that has to be matched. The example pattern matches all lines starting with [

    #multiline.pattern: ^[

    Defines if the pattern set under pattern should be negated or not. Default is false.

    #multiline.negate: false

    Match can be set to "after" or "before". It is used to define if lines should be append to a pattern

    that was (not) matched before or after or as long as a pattern is not matched based on negate.

    Note: After is the equivalent to previous and before is the equivalent to to next in Logstash

    #multiline.match: after

filestream is an experimental input. It is going to replace log input in the future.

  • type: filestream

    Change to true to enable this input configuration.

    enabled: false

    Paths that should be crawled and fetched. Glob based paths.

    paths:

    • /var/log/*.log
      #- c:\programdata\elasticsearch\logs*

    Exclude lines. A list of regular expressions to match. It drops the lines that are

    matching any regular expression from the list.

    #exclude_lines: ['^DBG']

    Include lines. A list of regular expressions to match. It exports the lines that are

    matching any regular expression from the list.

    #include_lines: ['^ERR', '^WARN']

    Exclude files. A list of regular expressions to match. Filebeat drops the files that

    are matching any regular expression from the list. By default, no files are dropped.

    #prospector.scanner.exclude_files: ['.gz$']

    Optional additional fields. These fields can be freely picked

    to add additional information to the crawled log files for filtering

    #fields:

    level: debug

    review: 1

============================== Filebeat modules ==============================

filebeat.config.modules:

Glob pattern for configuration loading

path: ${path.config}/modules.d/*.yml

Set to true to enable config reloading

reload.enabled: false

Period on which files under path should be checked for changes

#reload.period: 10s

======================= Elasticsearch template setting =======================

setup.template.settings:
index.number_of_shards: 1
#index.codec: best_compression
#_source.enabled: false

================================== General ===================================

The name of the shipper that publishes the network data. It can be used to group

all the transactions sent by a single shipper in the web interface.

#name:

The tags of the shipper are included in their own field with each

transaction published.

#tags: ["service-X", "web-tier"]

Optional fields that you can specify to add additional information to the

output.

#fields:

env: staging

================================= Dashboards =================================

These settings control loading the sample dashboards to the Kibana index. Loading

the dashboards is disabled by default and can be enabled either by setting the

options here or by using the setup command.

setup.dashboards.enabled: true

The URL from where to download the dashboards archive. By default this URL

has a value which is computed based on the Beat name and version. For released

versions, this URL points to the dashboard archive on the artifacts.elastic.co

website.

#setup.dashboards.url:

=================================== Kibana ===================================

Starting with Beats version 6.0.0, the dashboards are loaded via the Kibana API.

This requires a Kibana endpoint configuration.

setup.kibana:

Kibana Host

Scheme and port can be left out and will be set to the default (http and 5601)

In case you specify and additional path, the scheme is required: http://localhost:5601/path

IPv6 addresses should always be defined as: https://[2001:db8::1]:5601

#host: "localhost:5601"

Kibana Space ID

ID of the Kibana Space into which the dashboards should be loaded. By default,

the Default Space will be used.

#space.id:

=============================== Elastic Cloud ================================

These settings simplify using Filebeat with the Elastic Cloud (https://cloud.elastic.co/).

The cloud.id setting overwrites the output.elasticsearch.hosts and

setup.kibana.host options.

You can find the cloud.id in the Elastic Cloud web UI.

#cloud.id:

The cloud.auth setting overwrites the output.elasticsearch.username and

output.elasticsearch.password settings. The format is <user>:<pass>.

#cloud.auth:

================================== Outputs ===================================

Configure what output to use when sending the data collected by the beat.

---------------------------- Elasticsearch Output ----------------------------

output.elasticsearch:
hosts: ["http://localhost:9200/"]
username: "elastic"
password: "Qu3FlkZ0MskjwDgIFsXg"
setup.kibana:
host: "http://localhost:5601/"

Protocol - either http (default) or https.

#protocol: "https"

Authentication credentials - either API key or username/password.

#api_key: "id:api_key"
#username: "elastic"
#password: "changeme"

------------------------------ Logstash Output -------------------------------

#output.logstash:

The Logstash hosts

#hosts: ["localhost:5044"]

Optional SSL. By default is off.

List of root certificates for HTTPS server verifications

#ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

Certificate for SSL client authentication

#ssl.certificate: "/etc/pki/client/cert.pem"

Client Certificate Key

#ssl.key: "/etc/pki/client/cert.key"

================================= Processors =================================

processors:

  • add_host_metadata:
    when.not.contains.tags: forwarded
  • add_cloud_metadata: ~
  • add_docker_metadata: ~
  • add_kubernetes_metadata: ~

================================== Logging ===================================

Sets log level. The default log level is info.

Available log levels are: error, warning, info, debug

#logging.level: debug

At debug level, you can selectively enable logging only for some components.

To enable all selectors use ["*"]. Examples of other selectors are "beat",

"publisher", "service".

#logging.selectors: ["*"]

============================= X-Pack Monitoring ==============================

Filebeat can export internal metrics to a central Elasticsearch monitoring

cluster. This requires xpack monitoring to be enabled in Elasticsearch. The

reporting is disabled by default.

Set to true to enable the monitoring reporter.

#monitoring.enabled: false

Sets the UUID of the Elasticsearch cluster under which monitoring data for this

Filebeat instance will appear in the Stack Monitoring UI. If output.elasticsearch

is enabled, the UUID is derived from the Elasticsearch cluster referenced by output.elasticsearch.

#monitoring.cluster_uuid:

Uncomment to send the metrics to Elasticsearch. Most settings from the

Elasticsearch output are accepted here as well.

Note that the settings should point to your Elasticsearch monitoring cluster.

Any setting that is not set is automatically inherited from the Elasticsearch

output configuration, so if you have the Elasticsearch output configured such

that it is pointing to your Elasticsearch monitoring cluster, you can simply

uncomment the following line.

#monitoring.elasticsearch:

============================== Instrumentation ===============================

Instrumentation support for the filebeat.

#instrumentation:
# Set to true to enable instrumentation of filebeat.
#enabled: false

# Environment in which filebeat is running on (eg: staging, production, etc.)
#environment: ""

# APM Server hosts to report instrumentation results to.
#hosts:
#  - http://localhost:8200

# API Key for the APM Server(s).
# If api_key is set then secret_token will be ignored.
#api_key:

# Secret token for the APM Server(s).
#secret_token:

================================= Migration ==================================

This allows to enable 6.7 migration aliases

#migration.6_to_7.enabled: true

setup.ilm.overwrite: true

You have an extra / at the end of your kibana and elasticsearch urls. So filebeat is trying to connect to //api/status

Ohh Thanku very much for the help. Thats running perfectly.

Welcome to our community @TusharGarg! :smiley:

For any future threads you have, please keep these two things in mind;

  1. Please don't post pictures of text or code. They are difficult to read, impossible to search and replicate (if it's code), and some people may not be even able to see them
  2. Please format your code/logs/config using the </> button, or markdown style back ticks. It helps to make things easy to read which helps us help you

It's also helpful if your topic title is a summary of the issue, but a little more so than just a single word :slight_smile:

This topic was automatically closed 28 days after the last reply. New replies are no longer allowed.