Kibana server is not ready yet RHEL 8

Hi ,

I am installing ELK stack (Elasticsearch-7.10.2)on RHEL8 Elasticsearch and Kibana both installed
Successfully but when we open Kibana web console it is showing kibana server is not ready yet.

Below is Yml files.

Elasticsearch.yml

======================== Elasticsearch Configuration =========================

NOTE: Elasticsearch comes with reasonable defaults for most settings.

Before you set out to tweak and tune the configuration, make sure you

understand what are you trying to accomplish and the consequences.

The primary way of configuring a node is via this file. This template lists

the most important settings you may want to configure for a production cluster.

Please consult the documentation for further information on configuration options:

Elasticsearch Guide | Elastic

---------------------------------- Cluster -----------------------------------

Use a descriptive name for your cluster:

#cluster.name: my-application

------------------------------------ Node ------------------------------------

Use a descriptive name for the node:

#node.name: node-1

Add custom attributes to the node:

#node.attr.rack: r1

----------------------------------- Paths ------------------------------------

Path to directory where to store the data (separate multiple locations by comma):

path.data: /var/lib/Elasticsearch

Path to log files:

path.logs: /var/log/Elasticsearch

----------------------------------- Memory -----------------------------------

Lock the memory on startup:

#bootstrap.memory_lock: true

Make sure that the heap size is set to about half the memory available

on the system and that the owner of the process is allowed to use this

limit.

Elasticsearch performs poorly when the system is swapping the memory.

---------------------------------- Network -----------------------------------

Set the bind address to a specific IP (IPv4 or IPv6):

network.host: 172.22.22.21

Set a custom port for HTTP:

http.port: 9200

For more information, consult the network module documentation.

--------------------------------- Discovery ----------------------------------

Pass an initial list of hosts to perform discovery when this node is started:

The default list of hosts is ["127.0.0.1", "[::1]"]

discovery.seed_hosts: ["172.22.22.21", "host2"]

Bootstrap the cluster using an initial set of master-eligible nodes:

#cluster.initial_master_nodes: ["172.22.22.21", "node-2"]

For more information, consult the discovery and cluster formation module documentation.

---------------------------------- Gateway -----------------------------------

Block initial recovery after a full cluster restart until N nodes are started:

#gateway.recover_after_nodes: 3

For more information, consult the gateway module documentation.

---------------------------------- Various -----------------------------------

Require explicit names when deleting indices:

#action.destructive_requires_name: true

Kibana.yml

Kibana is served by a back end server. This setting specifies the port to use.

#server.port: 5601

Specifies the address to which the Kibana server will bind. IP addresses and host names are both valid values.

The default is 'localhost', which usually means remote machines will not be able to connect.

To allow connections from remote users, set this parameter to a non-loopback address.

server.host: "172.22.22.21"

Enables you to specify a path to mount Kibana at if you are running behind a proxy.

Use the server.rewriteBasePath setting to tell Kibana if it should remove the basePath

from requests it receives, and to prevent a deprecation warning at startup.

This setting cannot end in a slash.

#server.basePath: ""

Specifies whether Kibana should rewrite requests that are prefixed with

server.basePath or require that they are rewritten by your reverse proxy.

This setting was effectively always false before Kibana 6.3 and will

default to true starting in Kibana 7.0.

#server.rewriteBasePath: false

The maximum payload size in bytes for incoming server requests.

#server.maxPayloadBytes: 1048576

The Kibana server's name. This is used for display purposes.

#server.name: "your-hostname"

The URLs of the Elasticsearch instances to use for all your queries.

Elasticsearch.hosts: ["http://172.22.22.21:9200"]

Kibana uses an index in Elasticsearch to store saved searches, visualizations and

dashboards. Kibana creates a new index if the index doesn't already exist.

#kibana.index: ".kibana"

The default application to load.

#kibana.defaultAppId: "home"

If your Elasticsearch is protected with basic authentication, these settings provide

the username and password that the Kibana server uses to perform maintenance on the Kibana

index at startup. Your Kibana users still need to authenticate with Elasticsearch, which

is proxied through the Kibana server.

#elasticsearch.username: "kibana_system"
#elasticsearch.password: "pass"

Enables SSL and paths to the PEM-format SSL certificate and SSL key files, respectively.

These settings enable SSL for outgoing requests from the Kibana server to the browser.

#server.ssl.enabled: false
#server.ssl.certificate: /path/to/your/server.crt
#server.ssl.key: /path/to/your/server.key

Optional settings that provide the paths to the PEM-format SSL certificate and key files.

These files are used to verify the identity of Kibana to Elasticsearch and are required when

xpack.security.http.ssl.client_authentication in Elasticsearch is set to required.

#elasticsearch.ssl.certificate: /path/to/your/client.crt
#elasticsearch.ssl.key: /path/to/your/client.key

Optional setting that enables you to specify a path to the PEM file for the certificate

authority for your Elasticsearch instance.

#elasticsearch.ssl.certificateAuthorities: [ "/path/to/your/CA.pem" ]

To disregard the validity of SSL certificates, change this setting's value to 'none'.

#elasticsearch.ssl.verificationMode: full

Time in milliseconds to wait for Elasticsearch to respond to pings. Defaults to the value of

the Elasticsearch.requestTimeout setting.

#elasticsearch.pingTimeout: 1500

Time in milliseconds to wait for responses from the back end or Elasticsearch. This value

must be a positive integer.

#elasticsearch.requestTimeout: 30000

List of Kibana client-side headers to send to Elasticsearch. To send no client-side

headers, set this value to (an empty list).

#elasticsearch.requestHeadersWhitelist: [ authorization ]

Header names and values that are sent to Elasticsearch. Any custom headers cannot be overwritten

by client-side headers, regardless of the Elasticsearch.requestHeadersWhitelist configuration.

#elasticsearch.customHeaders: {}

Time in milliseconds for Elasticsearch to wait for responses from shards. Set to 0 to disable.

#elasticsearch.shardTimeout: 30000

Logs queries sent to Elasticsearch. Requires logging.verbose set to true.

#elasticsearch.logQueries: false

Specifies the path where Kibana creates the process ID file.

#pid.file: /var/run/kibana.pid

Enables you to specify a file where Kibana stores log output.

#logging.dest: /var/log/kibana.log

Set the value of this setting to true to suppress all logging output.

#logging.silent: false

Set the value of this setting to true to suppress all logging output other than error messages.

#logging.quiet: false

Set the value of this setting to true to log all events, including system usage information

and all requests.

#logging.verbose: false

Set the interval in milliseconds to sample system and process performance

metrics. Minimum is 100ms. Defaults to 5000.

#ops.interval: 5000

Specifies locale to be used for all localizable strings, dates and number formats.

Supported languages are the following: English - en , by default , Chinese - zh-CN .

#i18n.locale: "en"

Thanks in advance....

Welcome to our community! :smiley:

Please format your code/logs/config using the </> button, or markdown style back ticks. It helps to make things easy to read which helps us help you :slight_smile:

Hi,
Please find below .yml configuration.

Elasticsearch.yml

# ======================== Elasticsearch Configuration =========================
#
# NOTE: Elasticsearch comes with reasonable defaults for most settings.
#       Before you set out to tweak and tune the configuration, make sure you
#       understand what are you trying to accomplish and the consequences.
#
# The primary way of configuring a node is via this file. This template lists
# the most important settings you may want to configure for a production cluster.
#
# Please consult the documentation for further information on configuration options:
# https://www.elastic.co/guide/en/elasticsearch/reference/index.html
#
# ---------------------------------- Cluster -----------------------------------
#
# Use a descriptive name for your cluster:
#
#cluster.name: my-application
#
# ------------------------------------ Node ------------------------------------
#
# Use a descriptive name for the node:
#
#node.name: node-1
#
# Add custom attributes to the node:
#
#node.attr.rack: r1
#
# ----------------------------------- Paths ------------------------------------
#
# Path to directory where to store the data (separate multiple locations by comma):
#
path.data: /var/lib/elasticsearch
#
# Path to log files:
#
path.logs: /var/log/elasticsearch
#
# ----------------------------------- Memory -----------------------------------
#
# Lock the memory on startup:
#
#bootstrap.memory_lock: true
#
# Make sure that the heap size is set to about half the memory available
# on the system and that the owner of the process is allowed to use this
# limit.
#
# Elasticsearch performs poorly when the system is swapping the memory.
#
# ---------------------------------- Network -----------------------------------
#
# Set the bind address to a specific IP (IPv4 or IPv6):
#
network.host: 172.22.22.21
#
# Set a custom port for HTTP:
#
http.port: 9200
#
# For more information, consult the network module documentation.
#
# --------------------------------- Discovery ----------------------------------
#
# Pass an initial list of hosts to perform discovery when this node is started:
# The default list of hosts is ["127.0.0.1", "[::1]"]
#
discovery.seed_hosts: ["172.22.22.21", "host2"]
#
# Bootstrap the cluster using an initial set of master-eligible nodes:
#
#cluster.initial_master_nodes: ["172.22.22.21", "node-2"]
#
# For more information, consult the discovery and cluster formation module documentation.
#
# ---------------------------------- Gateway -----------------------------------
#
# Block initial recovery after a full cluster restart until N nodes are started:
#
#gateway.recover_after_nodes: 3
#
# For more information, consult the gateway module documentation.
#
# ---------------------------------- Various -----------------------------------
#
# Require explicit names when deleting indices:
#
#action.destructive_requires_name: true

Kibana.yml

# Kibana is served by a back end server. This setting specifies the port to use.
#server.port: 5601
# Specifies the address to which the Kibana server will bind. IP addresses and host names are both valid values.
# The default is 'localhost', which usually means remote machines will not be able to connect.
# To allow connections from remote users, set this parameter to a non-loopback address.
server.host: "172.22.22.21"

# Enables you to specify a path to mount Kibana at if you are running behind a proxy.
# Use the `server.rewriteBasePath` setting to tell Kibana if it should remove the basePath
# from requests it receives, and to prevent a deprecation warning at startup.
# This setting cannot end in a slash.
#server.basePath: ""

# Specifies whether Kibana should rewrite requests that are prefixed with
# `server.basePath` or require that they are rewritten by your reverse proxy.
# This setting was effectively always `false` before Kibana 6.3 and will
# default to `true` starting in Kibana 7.0.
#server.rewriteBasePath: false

# The maximum payload size in bytes for incoming server requests.
#server.maxPayloadBytes: 1048576

# The Kibana server's name.  This is used for display purposes.
#server.name: "your-hostname"

# The URLs of the Elasticsearch instances to use for all your queries.
elasticsearch.hosts: ["http://172.22.22.21:9200"]

# Kibana uses an index in Elasticsearch to store saved searches, visualizations and
# dashboards. Kibana creates a new index if the index doesn't already exist.
#kibana.index: ".kibana"

# The default application to load.
#kibana.defaultAppId: "home"

# If your Elasticsearch is protected with basic authentication, these settings provide
# the username and password that the Kibana server uses to perform maintenance on the Kibana
# index at startup. Your Kibana users still need to authenticate with Elasticsearch, which
# is proxied through the Kibana server.
#elasticsearch.username: "kibana_system"
#elasticsearch.password: "pass"

# Enables SSL and paths to the PEM-format SSL certificate and SSL key files, respectively.
# These settings enable SSL for outgoing requests from the Kibana server to the browser.
#server.ssl.enabled: false
#server.ssl.certificate: /path/to/your/server.crt
#server.ssl.key: /path/to/your/server.key

# Optional settings that provide the paths to the PEM-format SSL certificate and key files.
# These files are used to verify the identity of Kibana to Elasticsearch and are required when
# xpack.security.http.ssl.client_authentication in Elasticsearch is set to required.
#elasticsearch.ssl.certificate: /path/to/your/client.crt
#elasticsearch.ssl.key: /path/to/your/client.key

# Optional setting that enables you to specify a path to the PEM file for the certificate
# authority for your Elasticsearch instance.
#elasticsearch.ssl.certificateAuthorities: [ "/path/to/your/CA.pem" ]

# To disregard the validity of SSL certificates, change this setting's value to 'none'.
#elasticsearch.ssl.verificationMode: full

# Time in milliseconds to wait for Elasticsearch to respond to pings. Defaults to the value of
# the elasticsearch.requestTimeout setting.
#elasticsearch.pingTimeout: 1500

# Time in milliseconds to wait for responses from the back end or Elasticsearch. This value
# must be a positive integer.
#elasticsearch.requestTimeout: 30000

# List of Kibana client-side headers to send to Elasticsearch. To send *no* client-side
# headers, set this value to [] (an empty list).
#elasticsearch.requestHeadersWhitelist: [ authorization ]

# Header names and values that are sent to Elasticsearch. Any custom headers cannot be overwritten
# by client-side headers, regardless of the elasticsearch.requestHeadersWhitelist configuration.
#elasticsearch.customHeaders: {}

# Time in milliseconds for Elasticsearch to wait for responses from shards. Set to 0 to disable.
#elasticsearch.shardTimeout: 30000

# Logs queries sent to Elasticsearch. Requires logging.verbose set to true.
#elasticsearch.logQueries: false

# Specifies the path where Kibana creates the process ID file.
#pid.file: /var/run/kibana.pid

# Enables you to specify a file where Kibana stores log output.
#logging.dest: /var/log/kibana.log 

# Set the value of this setting to true to suppress all logging output.
#logging.silent: false

# Set the value of this setting to true to suppress all logging output other than error messages.
#logging.quiet: false

# Set the value of this setting to true to log all events, including system usage information
# and all requests.
#logging.verbose: false

# Set the interval in milliseconds to sample system and process performance
# metrics. Minimum is 100ms. Defaults to 5000.
#ops.interval: 5000

# Specifies locale to be used for all localizable strings, dates and number formats.
# Supported languages are the following: English - en , by default , Chinese - zh-CN .
#i18n.locale: "en"

Thanks

Thanks! For future reference you can also edit your original post and change the formatting if that's easier.

That all looks ok, so what do your Kibana logs show?

The moment we start the kibana services it stop again and we have seen that kibana logs is also no generating even we had enable the logs path in kibana.yml

Thanks

Hi,

Please find the attached Kibana logs

{"type":"log","@timestamp":"2022-04-06T06:34:17Z","tags":["warning","savedobjects-service"],"pid":96396,"message":"Unable to connect to Elasticsearch. Error: Given the configuration, the ConnectionPool was not able to find a usable Connection for this request."}
{"type":"log","@timestamp":"2022-04-06T06:34:19Z","tags":["info","plugins-service"],"pid":96680,"message":"Plugin \"visTypeXy\" is disabled."}
{"type":"log","@timestamp":"2022-04-06T06:34:19Z","tags":["info","plugins-system"],"pid":96680,"message":"Setting up [40] plugins: [usageCollection,telemetryCollectionManager,telemetry,kibanaUsageCollection,securityOss,newsfeed,mapsLegacy,kibanaLegacy,share,legacyExport,embeddable,expressions,data,home,console,apmOss,management,indexPatternManagement,advancedSettings,savedObjects,dashboard,visualizations,visTypeVega,visTypeTimelion,timelion,visTypeTable,visTypeMarkdown,tileMap,regionMap,inputControlVis,visualize,esUiShared,charts,visTypeVislib,visTypeTimeseries,visTypeTagcloud,visTypeMetric,discover,savedObjectsManagement,bfetch]"}
{"type":"log","@timestamp":"2022-04-06T06:34:20Z","tags":["info","savedobjects-service"],"pid":96680,"message":"Waiting until all Elasticsearch nodes are compatible with Kibana before starting saved objects migrations..."}
{"type":"log","@timestamp":"2022-04-06T06:34:20Z","tags":["info","savedobjects-service"],"pid":96680,"message":"Starting saved objects migrations"}
{"type":"log","@timestamp":"2022-04-06T06:34:50Z","tags":["error","elasticsearch","data"],"pid":96680,"message":"[TimeoutError]: Request timed out"}
{"type":"log","@timestamp":"2022-04-06T06:34:50Z","tags":["warning","savedobjects-service"],"pid":96680,"message":"Unable to connect to Elasticsearch. Error: Request timed out"}
{"type":"log","@timestamp":"2022-04-06T06:35:22Z","tags":["error","elasticsearch","data"],"pid":96680,"message":"[TimeoutError]: Request timed out"}
{"type":"log","@timestamp":"2022-04-06T06:35:55Z","tags":["error","elasticsearch","data"],"pid":96680,"message":"[TimeoutError]: Request timed out"}
{"type":"log","@timestamp":"2022-04-06T06:36:27Z","tags":["error","elasticsearch","data"],"pid":96680,"message":"[TimeoutError]: Request timed out"}
{"type":"log","@timestamp":"2022-04-06T06:37:00Z","tags":["error","elasticsearch","data"],"pid":96680,"message":"[TimeoutError]: Request timed out"}
{"type":"log","@timestamp":"2022-04-06T06:37:32Z","tags":["error","elasticsearch","data"],"pid":96680,"message":"[TimeoutError]: Request timed out"}
{"type":"log","@timestamp":"2022-04-06T06:38:05Z","tags":["error","elasticsearch","data"],"pid":96680,"message":"[TimeoutError]: Request timed out"}
{"type":"log","@timestamp":"2022-04-06T06:38:08Z","tags":["info","plugins-system"],"pid":96680,"message":"Stopping all plugins."}
{"type":"log","@timestamp":"2022-04-06T06:38:37Z","tags":["error","elasticsearch","data"],"pid":96680,"message":"[TimeoutError]: Request timed out"}
{"type":"log","@timestamp":"2022-04-06T06:38:40Z","tags":["info","plugins-service"],"pid":96717,"message":"Plugin \"visTypeXy\" is disabled."}
{"type":"log","@timestamp":"2022-04-06T06:38:40Z","tags":["info","plugins-system"],"pid":96717,"message":"Setting up [40] plugins: [usageCollection,telemetryCollectionManager,telemetry,kibanaUsageCollection,securityOss,newsfeed,mapsLegacy,kibanaLegacy,share,legacyExport,embeddable,expressions,data,home,console,apmOss,management,indexPatternManagement,advancedSettings,savedObjects,dashboard,visualizations,visTypeTable,visTypeVega,visTypeTimelion,timelion,visTypeMarkdown,tileMap,regionMap,inputControlVis,visualize,esUiShared,charts,visTypeTimeseries,visTypeVislib,visTypeTagcloud,visTypeMetric,discover,savedObjectsManagement,bfetch]"}
{"type":"log","@timestamp":"2022-04-06T06:38:40Z","tags":["info","savedobjects-service"],"pid":96717,"message":"Waiting until all Elasticsearch nodes are compatible with Kibana before starting saved objects migrations..."}
{"type":"log","@timestamp":"2022-04-06T06:38:40Z","tags":["info","savedobjects-service"],"pid":96717,"message":"Starting saved objects migrations"}
{"type":"log","@timestamp":"2022-04-06T06:39:10Z","tags":["error","elasticsearch","data"],"pid":96717,"message":"[TimeoutError]: Request timed out"}
{"type":"log","@timestamp":"2022-04-06T06:39:10Z","tags":["warning","savedobjects-service"],"pid":96717,"message":"Unable to connect to Elasticsearch. Error: Request timed out"}
{"type":"log","@timestamp":"2022-04-06T06:39:43Z","tags":["error","elasticsearch","data"],"pid":96717,"message":"[TimeoutError]: Request timed out"}
{"type":"log","@timestamp":"2022-04-06T06:40:15Z","tags":["error","elasticsearch","data"],"pid":96717,"message":"[TimeoutError]: Request timed out"}
{"type":"log","@timestamp":"2022-04-06T06:40:48Z","tags":["error","elasticsearch","data"],"pid":96717,"message":"[TimeoutError]: Request timed out"}
{"type":"log","@timestamp":"2022-04-06T06:41:20Z","tags":["error","elasticsearch","data"],"pid":96717,"message":"[TimeoutError]: Request timed out"}
{"type":"log","@timestamp":"2022-04-06T06:41:53Z","tags":["error","elasticsearch","data"],"pid":96717,"message":"[TimeoutError]: Request timed out"}
{"type":"log","@timestamp":"2022-04-06T06:42:25Z","tags":["error","elasticsearch","data"],"pid":96717,"message":"[TimeoutError]: Request timed out"}
{"type":"log","@timestamp":"2022-04-06T06:42:58Z","tags":["error","elasticsearch","data"],"pid":96717,"message":"[TimeoutError]: Request timed out"}
{"type":"log","@timestamp":"2022-04-06T06:43:30Z","tags":["error","elasticsearch","data"],"pid":96717,"message":"[TimeoutError]: Request timed out"}

Regards,
Ashish

That's why, it can't talk to Elasticsearch.
Can you curl http://172.22.22.21:9200?

Thanks It's working now :+1:

This topic was automatically closed 28 days after the last reply. New replies are no longer allowed.