Kibana upgrade trouble - nor 4.0BETA1 neither 3.11 work now!

Today I have upgraded 3 machines development ES cluster from 1.3.2 to 4.0.0
BETA1. As far as I can tell it went successfully - cluster state is green,
it responds to commands and all the data seems intact. New data keep coming
in and indexing.

BUT somehow I completely lost Kibana cooperation! I have Kibana 3.1.1
running on port 80 in IIS and when I try access it as usual
(http://tukc-devlog-1) I get back that new for 3.1.1 "Connection Failed"
screen and whatever I do it does not connect!

It says: "You will need to set http.cors.allow-origin in your
elasticsearch.yml to the correct protocol, hostname, and port (if not 80)
that your access Kibana from." ES, Kibana and browser are all on the same
box, so I went to elasticsearch-1.4.0.Beta1\config\elasticsearch.yml and
added this line:

http.cors.allow-origin: "http://TUKC-DEVLOG-1"

Restarted the node. Still same Connection Failed screen is all I get.

Out of curiosity I tried Kibana 4.0.0 Beta1 too and the result was also
negative, but even more confusing - "This version of Kibana requires at
least Elasticsearch 1.4.0.Beta1
" But that's exactly what I have running!

I'm temporary out of ideas how to make either of them work.

Any advice how to troubleshoot those two separate and probably different
issues with Kibana?

Thank you!
Konstantin

--
You received this message because you are subscribed to the Google Groups "elasticsearch" group.
To unsubscribe from this group and stop receiving emails from it, send an email to elasticsearch+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/elasticsearch/3fc58d4a-0b6a-4548-bc7a-e162f289d398%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Well, at least I got my Kibana 3.1.1 back! The trick was
"http.cors.enabled: true" setting in elasticsearch.yml which I found about
by reading the source code as it is not mentioned on that Kibana 3.1.1
"Connection Failed" screen, where it would be extremely useful.

Kibana 4 Beta still wants ES version which I already have, but... you
cannot have it all, can you?

Konstantin
On Wednesday, October 8, 2014 5:54:59 PM UTC-7, Konstantin Erman wrote:

Today I have upgraded 3 machines development ES cluster from 1.3.2 to
4.0.0 BETA1. As far as I can tell it went successfully - cluster state is
green, it responds to commands and all the data seems intact. New data keep
coming in and indexing.

BUT somehow I completely lost Kibana cooperation! I have Kibana 3.1.1
running on port 80 in IIS and when I try access it as usual (
http://tukc-devlog-1) I get back that new for 3.1.1 "Connection Failed"
screen and whatever I do it does not connect!

It says: "You will need to set http.cors.allow-origin in your
elasticsearch.yml to the correct protocol, hostname, and port (if not 80)
that your access Kibana from." ES, Kibana and browser are all on the same
box, so I went to elasticsearch-1.4.0.Beta1\config\elasticsearch.yml and
added this line:

http.cors.allow-origin: "http://TUKC-DEVLOG-1"

Restarted the node. Still same Connection Failed screen is all I get.

Out of curiosity I tried Kibana 4.0.0 Beta1 too and the result was also
negative, but even more confusing - "This version of Kibana requires at
least Elasticsearch 1.4.0.Beta1
" But that's exactly what I have running!

I'm temporary out of ideas how to make either of them work.

Any advice how to troubleshoot those two separate and probably different
issues with Kibana?

Thank you!
Konstantin

--
You received this message because you are subscribed to the Google Groups "elasticsearch" group.
To unsubscribe from this group and stop receiving emails from it, send an email to elasticsearch+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/elasticsearch/149d49f1-53a6-4bb6-8a6b-3afc656d39f6%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Got a similiar issue with the beta, getting the "This version of Kibana
requires at least Elasticsearch 1.4.0.Beta1
".
I've got kibana and elasticsearch(ie. http://localhost:9200) running on
the same box
It seems from what I can see in the logs, that Kibana is pushing the
requests to http://localhost:9200/elasticsearch/ instead of just
http://localhost:9200/

{"@timestamp":"2014-10-09T14:10:01+02:00","status":"200","level":"INFO","name":"Kibana","request_method":"HEAD","request":"/elasticsearch/","path":"/elasticsearch/","query_string":"","remote_addr":"172.16.5.90","remote_user":null,"http_version":"HTTP/1.1","content_length":"-","response_time":32,"message":"HEAD
/elasticsearch/ 200 32ms - -"}

Maybe somebody left something hardcoded in the beta, don't know. Just my 2
cents :slight_smile:

On Thursday, 9 October 2014 04:05:04 UTC+2, Konstantin Erman wrote:

Well, at least I got my Kibana 3.1.1 back! The trick was
"http.cors.enabled: true" setting in elasticsearch.yml which I found about
by reading the source code as it is not mentioned on that Kibana 3.1.1
"Connection Failed" screen, where it would be extremely useful.

Kibana 4 Beta still wants ES version which I already have, but... you
cannot have it all, can you?

Konstantin
On Wednesday, October 8, 2014 5:54:59 PM UTC-7, Konstantin Erman wrote:

Today I have upgraded 3 machines development ES cluster from 1.3.2 to
4.0.0 BETA1. As far as I can tell it went successfully - cluster state is
green, it responds to commands and all the data seems intact. New data keep
coming in and indexing.

BUT somehow I completely lost Kibana cooperation! I have Kibana 3.1.1
running on port 80 in IIS and when I try access it as usual (
http://tukc-devlog-1) I get back that new for 3.1.1 "Connection Failed"
screen and whatever I do it does not connect!

It says: "You will need to set http.cors.allow-origin in your
elasticsearch.yml to the correct protocol, hostname, and port (if not 80)
that your access Kibana from." ES, Kibana and browser are all on the same
box, so I went to elasticsearch-1.4.0.Beta1\config\elasticsearch.yml and
added this line:

http.cors.allow-origin: "http://TUKC-DEVLOG-1"

Restarted the node. Still same Connection Failed screen is all I get.

Out of curiosity I tried Kibana 4.0.0 Beta1 too and the result was also
negative, but even more confusing - "This version of Kibana requires at
least Elasticsearch 1.4.0.Beta1
" But that's exactly what I have
running!

I'm temporary out of ideas how to make either of them work.

Any advice how to troubleshoot those two separate and probably different
issues with Kibana?

Thank you!
Konstantin

--
You received this message because you are subscribed to the Google Groups "elasticsearch" group.
To unsubscribe from this group and stop receiving emails from it, send an email to elasticsearch+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/elasticsearch/3ca43818-a154-4c20-aee8-4bd42de69814%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

After all I've figured (with some help) that Kibana 4 uses node info API to
check that ALL nodes in the cluster are at least 1.4.0.Beta1, The trick is
that if you have Logstash talking to your ES, chances are it does so using
"node" protocol, effectively pretending to be extra nodes in cluster which
are obviously not of the right version. Switching Logstash to http protocol
does the trick of unblocking Kibana 4.0.0.Beta1.

Konstantin

On Wednesday, October 8, 2014 5:54:59 PM UTC-7, Konstantin Erman wrote:

Today I have upgraded 3 machines development ES cluster from 1.3.2 to
4.0.0 BETA1. As far as I can tell it went successfully - cluster state is
green, it responds to commands and all the data seems intact. New data keep
coming in and indexing.

BUT somehow I completely lost Kibana cooperation! I have Kibana 3.1.1
running on port 80 in IIS and when I try access it as usual (
http://tukc-devlog-1) I get back that new for 3.1.1 "Connection Failed"
screen and whatever I do it does not connect!

It says: "You will need to set http.cors.allow-origin in your
elasticsearch.yml to the correct protocol, hostname, and port (if not 80)
that your access Kibana from." ES, Kibana and browser are all on the same
box, so I went to elasticsearch-1.4.0.Beta1\config\elasticsearch.yml and
added this line:

http.cors.allow-origin: "http://TUKC-DEVLOG-1"

Restarted the node. Still same Connection Failed screen is all I get.

Out of curiosity I tried Kibana 4.0.0 Beta1 too and the result was also
negative, but even more confusing - "This version of Kibana requires at
least Elasticsearch 1.4.0.Beta1
" But that's exactly what I have running!

I'm temporary out of ideas how to make either of them work.

Any advice how to troubleshoot those two separate and probably different
issues with Kibana?

Thank you!
Konstantin

--
You received this message because you are subscribed to the Google Groups "elasticsearch" group.
To unsubscribe from this group and stop receiving emails from it, send an email to elasticsearch+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/elasticsearch/41a62220-799f-4932-b1dc-8ac7a5b08efa%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Can you expand on "node" protocol and how I make logstash use http protocol?

When I have the logstash agent turned off, kibana 4 page loads. When I turn
on my logstash agent, kibana 4 says "This version of Kibana requires at
least Elasticsearch 1.4.0.Beta1".

On Friday, October 10, 2014 10:45:49 AM UTC-7, Konstantin Erman wrote:

After all I've figured (with some help) that Kibana 4 uses node info API
to check that ALL nodes in the cluster are at least 1.4.0.Beta1, The trick
is that if you have Logstash talking to your ES, chances are it does so
using "node" protocol, effectively pretending to be extra nodes in cluster
which are obviously not of the right version. Switching Logstash to http
protocol does the trick of unblocking Kibana 4.0.0.Beta1.

Konstantin

On Wednesday, October 8, 2014 5:54:59 PM UTC-7, Konstantin Erman wrote:

Today I have upgraded 3 machines development ES cluster from 1.3.2 to
4.0.0 BETA1. As far as I can tell it went successfully - cluster state is
green, it responds to commands and all the data seems intact. New data keep
coming in and indexing.

BUT somehow I completely lost Kibana cooperation! I have Kibana 3.1.1
running on port 80 in IIS and when I try access it as usual (
http://tukc-devlog-1) I get back that new for 3.1.1 "Connection Failed"
screen and whatever I do it does not connect!

It says: "You will need to set http.cors.allow-origin in your
elasticsearch.yml to the correct protocol, hostname, and port (if not 80)
that your access Kibana from." ES, Kibana and browser are all on the same
box, so I went to elasticsearch-1.4.0.Beta1\config\elasticsearch.yml and
added this line:

http.cors.allow-origin: "http://TUKC-DEVLOG-1"

Restarted the node. Still same Connection Failed screen is all I get.

Out of curiosity I tried Kibana 4.0.0 Beta1 too and the result was also
negative, but even more confusing - "This version of Kibana requires at
least Elasticsearch 1.4.0.Beta1
" But that's exactly what I have
running!

I'm temporary out of ideas how to make either of them work.

Any advice how to troubleshoot those two separate and probably different
issues with Kibana?

Thank you!
Konstantin

--
You received this message because you are subscribed to the Google Groups "elasticsearch" group.
To unsubscribe from this group and stop receiving emails from it, send an email to elasticsearch+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/elasticsearch/6cf5db77-2a1e-4c46-a683-cefb026d18f3%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

In your logstash config file configure output similar to this:

output {
elasticsearch {
type => "eventlog"
index => "eventlog-%{+YYYY.MM.dd}"
cluster => "Scrat"
host => "localhost"
port => "9200"
* protocol => "http"*
idle_flush_time => 5
}
}

   * protocol => "http" is what makes the difference*

On Friday, November 7, 2014 4:51:35 PM UTC-8, Glenn Howald wrote:

Can you expand on "node" protocol and how I make logstash use http
protocol?

When I have the logstash agent turned off, kibana 4 page loads. When I
turn on my logstash agent, kibana 4 says "This version of Kibana requires
at least Elasticsearch 1.4.0.Beta1".

On Friday, October 10, 2014 10:45:49 AM UTC-7, Konstantin Erman wrote:

After all I've figured (with some help) that Kibana 4 uses node info API
to check that ALL nodes in the cluster are at least 1.4.0.Beta1, The trick
is that if you have Logstash talking to your ES, chances are it does so
using "node" protocol, effectively pretending to be extra nodes in cluster
which are obviously not of the right version. Switching Logstash to http
protocol does the trick of unblocking Kibana 4.0.0.Beta1.

Konstantin

On Wednesday, October 8, 2014 5:54:59 PM UTC-7, Konstantin Erman wrote:

Today I have upgraded 3 machines development ES cluster from 1.3.2 to
4.0.0 BETA1. As far as I can tell it went successfully - cluster state is
green, it responds to commands and all the data seems intact. New data keep
coming in and indexing.

BUT somehow I completely lost Kibana cooperation! I have Kibana 3.1.1
running on port 80 in IIS and when I try access it as usual (
http://tukc-devlog-1) I get back that new for 3.1.1 "Connection Failed"
screen and whatever I do it does not connect!

It says: "You will need to set http.cors.allow-origin in your
elasticsearch.yml to the correct protocol, hostname, and port (if not 80)
that your access Kibana from." ES, Kibana and browser are all on the same
box, so I went to elasticsearch-1.4.0.Beta1\config\elasticsearch.yml and
added this line:

http.cors.allow-origin: "http://TUKC-DEVLOG-1"

Restarted the node. Still same Connection Failed screen is all I get.

Out of curiosity I tried Kibana 4.0.0 Beta1 too and the result was also
negative, but even more confusing - "This version of Kibana requires
at least Elasticsearch 1.4.0.Beta1
" But that's exactly what I have
running!

I'm temporary out of ideas how to make either of them work.

Any advice how to troubleshoot those two separate and probably different
issues with Kibana?

Thank you!
Konstantin

--
You received this message because you are subscribed to the Google Groups "elasticsearch" group.
To unsubscribe from this group and stop receiving emails from it, send an email to elasticsearch+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/elasticsearch/dacbd28c-4cdc-4f8a-b975-5001296dde74%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.