Unable to start filebeat getting Exiting: couldn't connect to any of the configured Elasticsearch hosts. Errors: [error connecting to Elasticsearch at http://localhost:5601: Failed to parse JSON response: invalid character '<' l

Getting the below error
Exiting: couldn't connect to any of the configured Elasticsearch hosts. Errors: [error connecting to Elasticsearch at http://localhost:5601: Failed to parse JSON response: invalid character '<' l

here is the filebeat.yml
###################### Filebeat Configuration Example #########################

This file is an example configuration file highlighting only the most common

options. The filebeat.reference.yml file from the same directory contains all the

supported options with more comments. You can use it as a reference.

You can find the full configuration reference here:

Filebeat Reference | Elastic

For more available modules and options, please see the filebeat.reference.yml sample

configuration file.

============================== Filebeat inputs ===============================

filebeat.inputs:

  • type: log
    enabled: true
    paths:
    • C:\project\kotak\2022\3\1\CreditCardService\kotak-crosssell-creditcard\logs\kotak-crosssell-creditcard.log
      multiline:
      pattern: '^[\b\d{4}-\d{2}-\d{2}[T ]\d{2}:\d{2}'
      match: after
      negate: true

output.Elasticsearch:
hosts: ["localhost:9200"]
username: "elastic"
password: "paow8*mXNkVauPJ7NEb2"
index: "cross-sell"
pipeline: "cross-sell-pipeline"

setup:
template.enabled: false

Exclude lines. A list of regular expressions to match. It drops the lines that are

matching any regular expression from the list.

#exclude_lines: ['^DBG']

Include lines. A list of regular expressions to match. It exports the lines that are

matching any regular expression from the list.

#include_lines: ['^ERR', '^WARN']

Exclude files. A list of regular expressions to match. Filebeat drops the files that

are matching any regular expression from the list. By default, no files are dropped.

#prospector.scanner.exclude_files: ['.gz$']

Optional additional fields. These fields can be freely picked

to add additional information to the crawled log files for filtering

#fields:

level: debug

review: 1

============================== Filebeat modules ==============================

filebeat.config.modules:

Glob pattern for configuration loading

path: ${path.config}/modules.d/*.yml

Set to true to enable config reloading

reload.enabled: false

Period on which files under path should be checked for changes

#reload.period: 10s

======================= Elasticsearch template setting =======================

setup.template.settings:
index.number_of_shards: 1
#index.codec: best_compression
#_source.enabled: false

================================== General ===================================

The name of the shipper that publishes the network data. It can be used to group

all the transactions sent by a single shipper in the web interface.

#name:

The tags of the shipper are included in their own field with each

transaction published.

#tags: ["service-X", "web-tier"]

Optional fields that you can specify to add additional information to the

output.

#fields:

env: staging

================================= Dashboards =================================

These settings control loading the sample dashboards to the Kibana index. Loading

the dashboards is disabled by default and can be enabled either by setting the

options here or by using the setup command.

setup.dashboards.enabled: false

The URL from where to download the dashboards archive. By default this URL

has a value which is computed based on the Beat name and version. For released

versions, this URL points to the dashboard archive on the artifacts.elastic.co

website.

#setup.dashboards.url:

=================================== Kibana ===================================

Starting with Beats version 6.0.0, the dashboards are loaded via the Kibana API.

This requires a Kibana endpoint configuration.

setup.kibana:

Kibana Host

Scheme and port can be left out and will be set to the default (http and 5601)

In case you specify and additional path, the scheme is required: http://localhost:5601/path

IPv6 addresses should always be defined as: https://[2001:db8::1]:5601

host: "localhost:5601"

Kibana Space ID

ID of the Kibana Space into which the dashboards should be loaded. By default,

the Default Space will be used.

#space.id:

=============================== Elastic Cloud ================================

These settings simplify using Filebeat with the Elastic Cloud (https://cloud.elastic.co/).

The cloud.id setting overwrites the output.elasticsearch.hosts and

setup.kibana.host options.

You can find the cloud.id in the Elastic Cloud web UI.

#cloud.id:"staging:dXMtZWFzdC0xLmF3cy5mb3VuZC5pbyRjZWM2ZjI2MWE3NGJmMjRjZTMzYmI4ODExYjg0Mjk0ZiRjNmMyY2E2ZDA0MjI0OWFmMGNjN2Q3YTllOTYyNTc0Mw=="

The cloud.auth setting overwrites the output.elasticsearch.username and

output.elasticsearch.password settings. The format is <user>:<pass>.

#cloud.auth:password

================================== Outputs ===================================

Configure what output to use when sending the data collected by the beat.

---------------------------- Elasticsearch Output ----------------------------

output.Elasticsearch:

Array of hosts to connect to.

hosts: ["localhost:5601"]

Protocol - either http (default) or https.

#protocol: "https"

Authentication credentials - either API key or username/password.

#api_key: "id:api_key"
#username: "elastic"
#password: "changeme"

------------------------------ Logstash Output -------------------------------

#output.logstash:

The Logstash hosts

#hosts: ["localhost:5044"]

Optional SSL. By default is off.

List of root certificates for HTTPS server verifications

#ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

Certificate for SSL client authentication

#ssl.certificate: "/etc/pki/client/cert.pem"

Client Certificate Key

#ssl.key: "/etc/pki/client/cert.key"

================================= Processors =================================

processors:

  • add_host_metadata:
    when.not.contains.tags: forwarded
  • add_cloud_metadata: ~
  • add_docker_metadata: ~
  • add_kubernetes_metadata: ~

================================== Logging ===================================

Sets log level. The default log level is info.

Available log levels are: error, warning, info, debug

#logging.level: debug

At debug level, you can selectively enable logging only for some components.

To enable all selectors use ["*"]. Examples of other selectors are "beat",

"publisher", "service".

#logging.selectors: ["*"]

============================= X-Pack Monitoring ==============================

Filebeat can export internal metrics to a central Elasticsearch monitoring

cluster. This requires xpack monitoring to be enabled in Elasticsearch. The

reporting is disabled by default.

Set to true to enable the monitoring reporter.

#monitoring.enabled: false

Sets the UUID of the Elasticsearch cluster under which monitoring data for this

Filebeat instance will appear in the Stack Monitoring UI. If output.Elasticsearch

is enabled, the UUID is derived from the Elasticsearch cluster referenced by output.Elasticsearch.

#monitoring.cluster_uuid:

Uncomment to send the metrics to Elasticsearch. Most settings from the

Elasticsearch output are accepted here as well.

Note that the settings should point to your Elasticsearch monitoring cluster.

Any setting that is not set is automatically inherited from the Elasticsearch

output configuration, so if you have the Elasticsearch output configured such

that it is pointing to your Elasticsearch monitoring cluster, you can simply

uncomment the following line.

#monitoring.Elasticsearch:

============================== Instrumentation ===============================

Instrumentation support for the filebeat.

#instrumentation:
# Set to true to enable instrumentation of filebeat.
#enabled: false

# Environment in which filebeat is running on (eg: staging, production, etc.)
#environment: ""

# APM Server hosts to report instrumentation results to.
#hosts:
#  - http://localhost:8200

# API Key for the APM Server(s).
# If api_key is set then secret_token will be ignored.
#api_key:

# Secret token for the APM Server(s).
#secret_token:

================================= Migration ==================================

This allows to enable 6.7 migration aliases

#migration.6_to_7.enabled: true

5601is the port for Kibana. Elasticsearch should be 9200 at least.

Please reformat your post using code tags. It's hard to go through it and find any bugs.

Hi @sureshaws ,
Please try below one, pattern, match and negate should be under multiline not on same line

multiline:
  pattern: '^[\b\d{4}-\d{2}-\d{2}[T ]\d{2}:\d{2}'
  match: after
  negate: true

This topic was automatically closed 28 days after the last reply. New replies are no longer allowed.